lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 33/56] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
From
Date
13.05.2020 08:07, Wang, Jiada пишет:
> Hello Dmitry
>
> On 2020/05/12 8:13, Dmitry Osipenko wrote:
>> 11.05.2020 05:05, Wang, Jiada пишет:
>>> Hello Dmitry
>>>
>>> Thanks for your comment and test,
>>>
>>> can you let me know which platform (board) you are using for test,
>>> and DTS changes if you have added any.
>>
>> That's this device-tree [1] without any extra changes.
>>
> I am using Samsung Chromebook Pro for testing,
> but obviously some of the use cases it can't cover.
>
> I also would like to test on same device you are using,
> would you please let me know how to boot Acer Iconia Tab A500
> with custom images. Are you booting Linux or Android on it?

I'm using Ubuntu 20.04 on it at the moment. In order to boot custom
images you'll need at least to install a custom recovery, which will
allow to flash boot.img on eMMC storage.

Ideally, you'll need to install an unlocked bootloader that will enable
Android's fastboot, and thus, allow to easily boot kernel zImage without
messing with flashing boot images.

Could you please tell what is the current state of yours device: does it
have a stock Android installed? is it rooted? is custom recovery installed?

My device was unlocked about 8+ years ago, so I'm not sure what's the
best way to do it nowadays. The XDA forums [1] could be a good starting
point, I may give you some advises once you'll tell what's the current
status of yours device.

[1] https://forum.xda-developers.com/iconia-a500

\
 
 \ /
  Last update: 2020-05-14 06:55    [W:1.199 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site