lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect
From
Date
On Thu, 2020-05-14 at 11:52 +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
> - Allighed functions and its arguments.
> - replaced spaced by tabs for MACRO definition allignments.
> - Unified primary and secondary charger detect API's.
> - Used readl_poll_timeout instead of while loop condition check for register.
> - Fixed other comments as per inputs from Thierry.
> ---
> V2:
> - Patch re-based.
> ---
> drivers/phy/tegra/Makefile | 2 +-
> drivers/phy/tegra/cd.c | 283 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/phy/tegra/xusb.c | 80 +++++++++++++
> drivers/phy/tegra/xusb.h | 7 ++
> 4 files changed, 371 insertions(+), 1 deletion(-)
> create mode 100644 drivers/phy/tegra/cd.c
>
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 89b8406..befdfc4 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
>
> -phy-tegra-xusb-y += xusb.o
> +phy-tegra-xusb-y += xusb.o cd.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> diff --git a/drivers/phy/tegra/cd.c b/drivers/phy/tegra/cd.c
> new file mode 100644
> index 0000000..fddbe4c
> --- /dev/null
> +++ b/drivers/phy/tegra/cd.c
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +
> +#include "xusb.h"
> +
> +/* Data contact detection timeout */
> +#define TDCD_TIMEOUT_MS 400
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x80 + (x) * 0x40)
> +#define PD_CHG (1 << 0)
> +#define VDCD_DET_FILTER_EN (1 << 4)
> +#define VDAT_DET (1 << 5)
> +#define VDAT_DET_FILTER_EN (1 << 8)
> +#define OP_SINK_EN (1 << 9)
> +#define OP_SRC_EN (1 << 10)
> +#define ON_SINK_EN (1 << 11)
> +#define ON_SRC_EN (1 << 12)
> +#define OP_I_SRC_EN (1 << 13)
> +#define ZIP_FILTER_EN (1 << 21)
> +#define ZIN_FILTER_EN (1 << 25)
> +#define DCD_DETECTED (1 << 26)
Use BIT() ?
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x84 + (x) * 0x40)
> +#define PD_VREG (1 << 6)
> +#define VREG_LEV(x) (((x) & 0x3) << 7)
> +#define VREG_DIR(x) (((x) & 0x3) << 11)
> +#define VREG_DIR_IN VREG_DIR(1)
> +#define VREG_DIR_OUT VREG_DIR(2)
> +#define USBOP_RPD_OVRD (1 << 16)
> +#define USBOP_RPD_OVRD_VAL (1 << 17)
> +#define USBOP_RPU_OVRD (1 << 18)
> +#define USBOP_RPU_OVRD_VAL (1 << 19)
> +#define USBON_RPD_OVRD (1 << 20)
> +#define USBON_RPD_OVRD_VAL (1 << 21)
> +#define USBON_RPU_OVRD (1 << 22)
> +#define USBON_RPU_OVRD_VAL (1 << 23)
> +
> +#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40)
> +#define USB2_OTG_PD2 (1 << 27)
> +#define USB2_OTG_PD2_OVRD_EN (1 << 28)
> +#define USB2_OTG_PD_ZI (1 << 29)
> +
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
> +#define TDCD_DBNC(x) (((x) & 0x7ff) << 0)
> +
> +static void
> +tegra_xusb_padctl_set_debounce_time(struct tegra_xusb_padctl *padctl,
> + u32 debounce)

\
 
 \ /
  Last update: 2020-05-14 09:05    [W:0.183 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site