lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
Date
Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 revision
and ipq8065 have the tx term offset set to 0.

Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f5398b0d270c..ab6f1bdd24c3 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -45,6 +45,9 @@
#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10

#define PCIE20_PARF_PHY_CTRL 0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16)
+
#define PCIE20_PARF_PHY_REFCLK 0x4C
#define PHY_REFCLK_SSP_EN BIT(16)
#define PHY_REFCLK_USE_PAD BIT(12)
@@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
val &= ~BIT(0);
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);

- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
+ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
@@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
}

+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+ /* set TX termination offset */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+ val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
+ val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+ }
+
/* enable external reference clock */
val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
- val |= BIT(16);
+ val &= ~PHY_REFCLK_USE_PAD;
+ val |= PHY_REFCLK_SSP_EN;
writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);

/* wait for clock acquisition */
@@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
--
2.25.1
\
 
 \ /
  Last update: 2020-05-14 22:08    [W:0.083 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site