lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: imx6sl: Use nvmem interface to get fuse data
Date
Although ocotp clock is always ON for i.MX6SL, OCOTP can be
accessed directly, but since i.MX6SL nvmem interface is supported,
and fsl,tempmon-data is deprecated, use it instead of getting fuse
data by reading ocotp directly, this makes all i.MX6 SoCs aligned.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm/boot/dts/imx6sl.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 8230b45..fcb84fe 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -98,7 +98,8 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpc>;
fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
};

@@ -961,6 +962,14 @@
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};

audmux: audmux@21d8000 {
--
2.7.4
\
 
 \ /
  Last update: 2020-05-14 03:19    [W:0.056 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site