lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 bpf-next 6/7] bpf: add support for %pT format specifier for bpf_trace_printk() helper
From
Date


On 5/11/20 10:56 PM, Alan Maguire wrote:
> Allow %pT[cNx0] format specifier for BTF-based display of data associated
> with pointer.
>
> Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
> ---
> include/uapi/linux/bpf.h | 27 ++++++++++++++++++++++-----
> kernel/trace/bpf_trace.c | 21 ++++++++++++++++++---
> tools/include/uapi/linux/bpf.h | 27 ++++++++++++++++++++++-----
> 3 files changed, 62 insertions(+), 13 deletions(-)
>
> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> index 9d1932e..ab3c86c 100644
> --- a/include/uapi/linux/bpf.h
> +++ b/include/uapi/linux/bpf.h
> @@ -695,7 +695,12 @@ struct bpf_stack_build_id {
> * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
> * available. It can take up to three additional **u64**
> * arguments (as an eBPF helpers, the total number of arguments is
> - * limited to five).
> + * limited to five), and also supports %pT (BTF-based type
> + * printing), as long as BPF_READ lockdown is not active.
> + * "%pT" takes a "struct __btf_ptr *" as an argument; it
> + * consists of a pointer value and specified BTF type string or id
> + * used to select the type for display. For more details, see
> + * Documentation/core-api/printk-formats.rst.
> *
> * Each time the helper is called, it appends a line to the trace.
> * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
> @@ -731,10 +736,10 @@ struct bpf_stack_build_id {
> * The conversion specifiers supported by *fmt* are similar, but
> * more limited than for printk(). They are **%d**, **%i**,
> * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
> - * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
> - * of field, padding with zeroes, etc.) is available, and the
> - * helper will return **-EINVAL** (but print nothing) if it
> - * encounters an unknown specifier.
> + * **%lli**, **%llu**, **%llx**, **%p**, **%pT[cNx0], **%s**.
> + * Only %pT supports modifiers, and the helper will return
> + * **-EINVAL** (but print nothing) if it encouters an unknown
> + * specifier.
> *
> * Also, note that **bpf_trace_printk**\ () is slow, and should
> * only be used for debugging purposes. For this reason, a notice
> @@ -4058,4 +4063,16 @@ struct bpf_pidns_info {
> __u32 pid;
> __u32 tgid;
> };
> +
> +/*
> + * struct __btf_ptr is used for %pT (typed pointer) display; the
> + * additional type string/BTF id are used to render the pointer
> + * data as the appropriate type.
> + */
> +struct __btf_ptr {
> + void *ptr;
> + const char *type;
> + __u32 id;
> +};
> +
> #endif /* _UAPI__LINUX_BPF_H__ */
> diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> index d961428..c032c58 100644
> --- a/kernel/trace/bpf_trace.c
> +++ b/kernel/trace/bpf_trace.c
> @@ -321,9 +321,12 @@ static const struct bpf_func_proto *bpf_get_probe_write_proto(void)
> return &bpf_probe_write_user_proto;
> }
>
> +#define isbtffmt(c) \
> + (c == 'T' || c == 'c' || c == 'N' || c == 'x' || c == '0')
> +
> /*
> * Only limited trace_printk() conversion specifiers allowed:
> - * %d %i %u %x %ld %li %lu %lx %lld %lli %llu %llx %p %s
> + * %d %i %u %x %ld %li %lu %lx %lld %lli %llu %llx %p %pT %s
> */
> BPF_CALL_5(bpf_trace_printk, char *, fmt, u32, fmt_size, u64, arg1,
> u64, arg2, u64, arg3)
> @@ -361,8 +364,20 @@ static const struct bpf_func_proto *bpf_get_probe_write_proto(void)
> i++;
> } else if (fmt[i] == 'p' || fmt[i] == 's') {
> mod[fmt_cnt]++;
> - /* disallow any further format extensions */
> - if (fmt[i + 1] != 0 &&
> + /*
> + * allow BTF type-based printing, and disallow any
> + * further format extensions.
> + */
> + if (fmt[i] == 'p' && fmt[i + 1] == 'T') {
> + int ret;
> +
> + ret = security_locked_down(LOCKDOWN_BPF_READ);
> + if (unlikely(ret < 0))
> + return ret;
> + i++;
> + while (isbtffmt(fmt[i]))
> + i++;

The pointer passed to the helper may not be valid pointer. I think you
need to do a probe_read_kernel() here. Do an atomic memory allocation
here should be okay as this is mostly for debugging only.


> + } else if (fmt[i + 1] != 0 &&
> !isspace(fmt[i + 1]) &&
> !ispunct(fmt[i + 1]))
> return -EINVAL;
> diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
> index 9d1932e..ab3c86c 100644
> --- a/tools/include/uapi/linux/bpf.h
> +++ b/tools/include/uapi/linux/bpf.h
> @@ -695,7 +695,12 @@ struct bpf_stack_build_id {
> * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
> * available. It can take up to three additional **u64**
> * arguments (as an eBPF helpers, the total number of arguments is
> - * limited to five).
> + * limited to five), and also supports %pT (BTF-based type
> + * printing), as long as BPF_READ lockdown is not active.
> + * "%pT" takes a "struct __btf_ptr *" as an argument; it
> + * consists of a pointer value and specified BTF type string or id
> + * used to select the type for display. For more details, see
> + * Documentation/core-api/printk-formats.rst.
> *
> * Each time the helper is called, it appends a line to the trace.
> * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
> @@ -731,10 +736,10 @@ struct bpf_stack_build_id {
> * The conversion specifiers supported by *fmt* are similar, but
> * more limited than for printk(). They are **%d**, **%i**,
> * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
> - * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
> - * of field, padding with zeroes, etc.) is available, and the
> - * helper will return **-EINVAL** (but print nothing) if it
> - * encounters an unknown specifier.
> + * **%lli**, **%llu**, **%llx**, **%p**, **%pT[cNx0], **%s**.
> + * Only %pT supports modifiers, and the helper will return
> + * **-EINVAL** (but print nothing) if it encouters an unknown
> + * specifier.
> *
> * Also, note that **bpf_trace_printk**\ () is slow, and should
> * only be used for debugging purposes. For this reason, a notice
> @@ -4058,4 +4063,16 @@ struct bpf_pidns_info {
> __u32 pid;
> __u32 tgid;
> };
> +
> +/*
> + * struct __btf_ptr is used for %pT (typed pointer) display; the
> + * additional type string/BTF id are used to render the pointer
> + * data as the appropriate type.
> + */
> +struct __btf_ptr {
> + void *ptr;
> + const char *type;
> + __u32 id;
> +};
> +
> #endif /* _UAPI__LINUX_BPF_H__ */
>

\
 
 \ /
  Last update: 2020-05-14 02:54    [W:0.181 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site