lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v10 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
Date
Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
MAINTAINERS | 8 ++++++++
drivers/usb/host/Kconfig | 20 ++++++++++++++++++++
drivers/usb/host/Makefile | 1 +
3 files changed, 29 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 091ec22c1a23..e5e44b595bc4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3481,6 +3481,14 @@ S: Supported
F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
F: drivers/i2c/busses/i2c-brcmstb.c

+BROADCOM BRCMSTB USB EHCI DRIVER
+M: Al Cooper <alcooperx@gmail.com>
+L: linux-usb@vger.kernel.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
+F: drivers/usb/host/ehci-brcm.*
+
BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 55bdfdf11e4c..973386bbb522 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -97,6 +97,26 @@ config USB_XHCI_TEGRA

endif # USB_XHCI_HCD

+config USB_EHCI_BRCMSTB
+ tristate
+
+config USB_BRCMSTB
+ tristate "Broadcom STB USB support"
+ depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+ select USB_EHCI_BRCMSTB if USB_EHCI_HCD
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ help
+ Enables support for XHCI, EHCI and OHCI host controllers
+ found in Broadcom STB SoC's.
+
+ To compile these drivers as modules, choose M here: the
+ modules will be called ohci-platform.ko, ehci-brcm.ko and
+ xhci-plat-hcd.ko
+
+ Disabling this will keep the controllers and corresponding
+ PHYs powered down.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on HAS_DMA && HAS_IOMEM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a7f0b8ff7179..265e26cf9209 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o

obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
--
2.17.1
\
 
 \ /
  Last update: 2020-05-12 17:01    [W:0.083 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site