lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: stable/linux-4.4.y bisection: baseline.login on at91-sama5d4_xplained
Hi,

On 12/05/2020 06:54:29+0100, Guillaume Tucker wrote:
> Please see the bisection report below about a boot failure.
>
> Reports aren't automatically sent to the public while we're
> trialing new bisection features on kernelci.org but this one
> looks valid.
>
> It appears to be due to the fact that the network interface is
> failing to get brought up:
>
> [ 114.385000] Waiting up to 10 more seconds for network.
> [ 124.355000] Sending DHCP requests ...#
> ..#
> .#
> timed out!
> [ 212.355000] IP-Config: Reopening network devices...
> [ 212.365000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> #
>
>
> I guess the board would boot fine without network if it didn't
> have ip=dhcp in the command line, so it's not strictly a kernel
> boot failure but still an ethernet issue.
>

I think the resolution of this issue is
99f81afc139c6edd14d77a91ee91685a414a1c66. If this is taken, then I think
f5aba91d7f186cba84af966a741a0346de603cd4 should also be backported.


> There wasn't any failure reported by kernelci on linux-4.9.y so
> maybe this patch was applied by mistake on linux-4.4.y but I
> haven't investigated enough to prove this.
>
> Thanks,
> Guillaume
>
>
> On 10/05/2020 18:27, kernelci.org bot wrote:
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> > * This automated bisection report was sent to you on the basis *
> > * that you may be involved with the breaking commit it has *
> > * found. No manual investigation has been done to verify it, *
> > * and the root cause of the problem may be somewhere else. *
> > * *
> > * If you do send a fix, please include this trailer: *
> > * Reported-by: "kernelci.org bot" <bot@kernelci.org> *
> > * *
> > * Hope this helps! *
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> >
> > stable/linux-4.4.y bisection: baseline.login on at91-sama5d4_xplained
> >
> > Summary:
> > Start: e157447efd85b Linux 4.4.223
> > Plain log: https://storage.kernelci.org/stable/linux-4.4.y/v4.4.223/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-at91-sama5d4_xplained.txt
> > HTML log: https://storage.kernelci.org/stable/linux-4.4.y/v4.4.223/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-at91-sama5d4_xplained.html
> > Result: 0d1951fa23ba0 net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS
> >
> > Checks:
> > revert: PASS
> > verify: PASS
> >
> > Parameters:
> > Tree: stable
> > URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
> > Branch: linux-4.4.y
> > Target: at91-sama5d4_xplained
> > CPU arch: arm
> > Lab: lab-baylibre
> > Compiler: gcc-8
> > Config: multi_v7_defconfig
> > Test case: baseline.login
> >
> > Breaking commit found:
> >
> > -------------------------------------------------------------------------------
> > commit 0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd
> > Author: Florian Fainelli <f.fainelli@gmail.com>
> > Date: Mon Jan 18 19:33:06 2016 -0800
> >
> > net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS
> >
> > commit d5c3d84657db57bd23ecd58b97f1c99dd42a7b80 upstream.
> >
> > Commit 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed
> > a hunk in phy_state_machine() in the PHY_RUNNING case which was not
> > needed. The change essentially makes the PHY library treat PHY devices
> > with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even
> > though the intent is not to do it.
> >
> > Fix this by reverting that specific hunk, which makes the PHY state
> > machine wait for state changes, and stay in the PHY_RUNNING state for as
> > long as needed.
> >
> > Fixes: 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT")
> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> > index 7d2cf015c5e76..b242bec834f4b 100644
> > --- a/drivers/net/phy/phy.c
> > +++ b/drivers/net/phy/phy.c
> > @@ -912,10 +912,10 @@ void phy_state_machine(struct work_struct *work)
> > phydev->adjust_link(phydev->attached_dev);
> > break;
> > case PHY_RUNNING:
> > - /* Only register a CHANGE if we are polling or ignoring
> > - * interrupts and link changed since latest checking.
> > + /* Only register a CHANGE if we are polling and link changed
> > + * since latest checking.
> > */
> > - if (!phy_interrupt_is_valid(phydev)) {
> > + if (phydev->irq == PHY_POLL) {
> > old_link = phydev->link;
> > err = phy_read_status(phydev);
> > if (err)
> > @@ -1015,8 +1015,13 @@ void phy_state_machine(struct work_struct *work)
> > dev_dbg(&phydev->dev, "PHY state change %s -> %s\n",
> > phy_state_to_str(old_state), phy_state_to_str(phydev->state));
> >
> > - queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
> > - PHY_STATE_TIME * HZ);
> > + /* Only re-schedule a PHY state machine change if we are polling the
> > + * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
> > + * between states from phy_mac_interrupt()
> > + */
> > + if (phydev->irq == PHY_POLL)
> > + queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
> > + PHY_STATE_TIME * HZ);
> > }
> >
> > void phy_mac_interrupt(struct phy_device *phydev, int new_link)
> > -------------------------------------------------------------------------------
> >
> >
> > Git bisection log:
> >
> > -------------------------------------------------------------------------------
> > git bisect start
> > # good: [b63f449e18b130fdc372b9717e72c19b83fc4876] Linux 4.4.222
> > git bisect good b63f449e18b130fdc372b9717e72c19b83fc4876
> > # bad: [e157447efd85bb2e6f8deaabbb62663bccd9bad2] Linux 4.4.223
> > git bisect bad e157447efd85bb2e6f8deaabbb62663bccd9bad2
> > # bad: [5733a9f4a3df384097c92c532aed34bc698a9acd] net: dsa: slave: fix of-node leak and phy priority
> > git bisect bad 5733a9f4a3df384097c92c532aed34bc698a9acd
> > # good: [1ce6993b857318a4b8c674b1bbaaf79aced34136] net/mlx5e: Fix blue flame quota logic
> > git bisect good 1ce6993b857318a4b8c674b1bbaaf79aced34136
> > # good: [c32532162f8ea4beed50a20cf4f9b205c75fe1b1] serial: samsung: Fix possible out of bounds access on non-DT platform
> > git bisect good c32532162f8ea4beed50a20cf4f9b205c75fe1b1
> > # good: [25e8aad6f491da6ae330148da09585371a3790f2] Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()"
> > git bisect good 25e8aad6f491da6ae330148da09585371a3790f2
> > # good: [2f3e56e4b6020812350190f1cada230d790ce0e8] powerpc/tm: Fix stack pointer corruption in __tm_recheckpoint()
> > git bisect good 2f3e56e4b6020812350190f1cada230d790ce0e8
> > # bad: [0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd] net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS
> > git bisect bad 0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd
> > # good: [4ebef63e925e37f5de2f9da8fc86a545e4e0b945] sctp: fix the transports round robin issue when init is retransmitted
> > git bisect good 4ebef63e925e37f5de2f9da8fc86a545e4e0b945
> > # good: [c175435fdf50c81ca2b6576f090cba31c3489209] NFC: nci: memory leak in nci_core_conn_create()
> > git bisect good c175435fdf50c81ca2b6576f090cba31c3489209
> > # first bad commit: [0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd] net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS
> > -------------------------------------------------------------------------------
> >
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-05-12 13:12    [W:0.103 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site