lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd
Date
The PRM (Power and Reset Module) has registers to enable and disable
power domains, so let's update the binding for that.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Documentation/devicetree/bindings/arm/omap/prm-inst.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
--- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -18,12 +18,16 @@ Required properties:
(base address and length)

Optional properties:
+- #power-domain-cells: Should be 0 if the PRM instance is a power domain.
- #reset-cells: Should be 1 if the PRM instance in question supports resets.
+- clocks: Functional and interface clocks managed by the power domain
+- clock-names: Names for the clocks using "fck" and "ick" naming

Example:

prm_dsp2: prm@1b00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b00 0x40>;
+ #power-domain-cells = <0>;
#reset-cells = <1>;
};
--
2.26.2
\
 
 \ /
  Last update: 2020-05-12 22:39    [W:0.056 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site