lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 8/8] arm64: dts: ipq6018: Add a53 pll and apcs clock
On Sun 03 May 23:20 PDT 2020, Sivaprakash Murugesan wrote:

> add support for apps pll and apcs clock.
>
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 1aa8d85..af2ceeb 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -294,12 +294,22 @@
> };
>
> apcs_glb: mailbox@b111000 {
> - compatible = "qcom,ipq8074-apcs-apps-global";
> - reg = <0x0b111000 0xc>;
> -
> + compatible = "qcom,ipq6018-apcs-apps-global";
> + reg = <0x0b111000 0x1000>;

My documentation states that IPQ8074 indeed has this block at
0x0b111000, but IPQ6018 it's at 0x6b111000. Can you confirm this is
correct? Same with the pll below.

Apart from that the patch looks good.

Regards,
Bjorn

> + #clock-cells = <1>;
> + clocks = <&apsspll>, <&xo>;
> + clock-names = "pll", "xo";
> #mbox-cells = <1>;
> };
>
> + apsspll: clock@b116000 {
> + compatible = "qcom,ipq-apss-pll";
> + reg = <0x0b116000 0x40>;
> + #clock-cells = <0>;
> + clocks = <&xo>;
> + clock-names = "xo";
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-05-12 22:27    [W:0.193 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site