lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 1/6] i2c: i801: Use GPIO_LOOKUP() helper macro
Date
i801_add_mux() fills in the GPIO lookup table by manually populating an
array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper
macro instead, to relax a dependency on the gpiod_lookup structure's
member names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
---
This is now commit be1b92c133cc91b2 ("i2c: i801: Use GPIO_LOOKUP()
helper macro") in i2c/for-next.

v7:
- Add Reviewed-by,

v6:
- New.
---
drivers/i2c/busses/i2c-i801.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index a9c03f5c34825a95..4f333889489c882a 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1439,9 +1439,9 @@ static int i801_add_mux(struct i801_priv *priv)
return -ENOMEM;
lookup->dev_id = "i2c-mux-gpio";
for (i = 0; i < mux_config->n_gpios; i++) {
- lookup->table[i].chip_label = mux_config->gpio_chip;
- lookup->table[i].chip_hwnum = mux_config->gpios[i];
- lookup->table[i].con_id = "mux";
+ lookup->table[i] = (struct gpiod_lookup)
+ GPIO_LOOKUP(mux_config->gpio_chip,
+ mux_config->gpios[i], "mux", 0);
}
gpiod_add_lookup_table(lookup);
priv->lookup = lookup;
--
2.17.1
\
 
 \ /
  Last update: 2020-05-11 16:54    [W:0.256 / U:22.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site