lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] dt-bindings: reset: Convert i.MX7 reset to json-schema
Date


> Subject: RE: [PATCH] dt-bindings: reset: Convert i.MX7 reset to json-schema
>
> [...]
>
> > +
> > +maintainers:
> > + - Anson Huang <Anson.Huang@nxp.com>
> > +
> > +description: |
> > + The system reset controller can be used to reset various set of
> > + peripherals. Device nodes that need access to reset lines should
> > + specify them as a reset phandle in their corresponding node as
> > + specified in reset.txt.
> > +
> > + For list of all valid reset indices see
> > + <dt-bindings/reset/imx7-reset.h> for i.MX7,
> > + <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
> > + <dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
> > + <dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
>
> How about combine above three items?

Will do.

>
> > + <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - fsl,imx7d-src
> > + - fsl,imx8mq-src
> > + - fsl,imx8mm-src
> > + - fsl,imx8mn-src
> > + - fsl,imx8mp-src
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + '#reset-cells':
> > + const: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - '#reset-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + reset-controller@30390000 {
> > + compatible = "fsl,imx7d-src", "syscon";
> > + reg = <0x30390000 0x2000>;
> > + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > + #reset-cells = <1>;
> > + };
> > +
> > +...
>
> Is this required?

It can be removed, will remove it in next version.

Anson
\
 
 \ /
  Last update: 2020-05-11 13:32    [W:0.051 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site