lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile
Date
Hi Al,

> From: Al Cooper, Sent: Saturday, May 9, 2020 6:19 AM
>
> Some BRCMSTB USB chips have an XHCI, EHCI and OHCI controller
> on the same port where XHCI handles 3.0 devices, EHCI handles 2.0
> devices and OHCI handles <2.0 devices. Currently the Makefile
> has XHCI linking at the bottom which will result in the XHIC driver
> initalizing after the EHCI and OHCI drivers and any installed 3.0
> device will be seen as a 2.0 device. Moving the XHCI linking
> above the EHCI and OHCI linking fixes the issue.
>
> Signed-off-by: Al Cooper <alcooperx@gmail.com>

I tested on my environment (r8a77951 and r8a77961) and then
I didn't detect any regression. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda

\
 
 \ /
  Last update: 2020-05-11 13:09    [W:0.100 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site