lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/8] dt-bindings: memory: Convert ingenic,jz4780-nemc.txt to YAML
On Sun, Apr 26, 2020 at 08:58:52PM +0200, Paul Cercueil wrote:
> Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml.
>
> The ingenic,jz4725b-nemc compatible string was added in the process,
> with a fallback to ingenic,jz4740-nemc.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> .../ingenic,jz4780-nemc.txt | 76 ---------------
> .../ingenic,nemc-client.yaml | 45 +++++++++
> .../memory-controllers/ingenic,nemc.yaml | 95 +++++++++++++++++++
> 3 files changed, 140 insertions(+), 76 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
> deleted file mode 100644
> index 59b8dcc118ee..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -* Ingenic JZ4780 NAND/external memory controller (NEMC)
> -
> -This file documents the device tree bindings for the NEMC external memory
> -controller in Ingenic JZ4780
> -
> -Required properties:
> -- compatible: Should be set to one of:
> - "ingenic,jz4740-nemc" (JZ4740)
> - "ingenic,jz4780-nemc" (JZ4780)
> -- reg: Should specify the NEMC controller registers location and length.
> -- clocks: Clock for the NEMC controller.
> -- #address-cells: Must be set to 2.
> -- #size-cells: Must be set to 1.
> -- ranges: A set of ranges for each bank describing the physical memory layout.
> - Each should specify the following 4 integer values:
> -
> - <cs number> 0 <physical address of mapping> <size of mapping>
> -
> -Each child of the NEMC node describes a device connected to the NEMC.
> -
> -Required child node properties:
> -- reg: Should contain at least one register specifier, given in the following
> - format:
> -
> - <cs number> <offset> <size>
> -
> - Multiple registers can be specified across multiple banks. This is needed,
> - for example, for packaged NAND devices with multiple dies. Such devices
> - should be grouped into a single node.
> -
> -Optional child node properties:
> -- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits.
> -- ingenic,nemc-tAS: Address setup time in nanoseconds.
> -- ingenic,nemc-tAH: Address hold time in nanoseconds.
> -- ingenic,nemc-tBP: Burst pitch time in nanoseconds.
> -- ingenic,nemc-tAW: Access wait time in nanoseconds.
> -- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds.
> -
> -If a child node references multiple banks in its "reg" property, the same value
> -for all optional parameters will be configured for all banks. If any optional
> -parameters are omitted, they will be left unchanged from whatever they are
> -configured to when the NEMC device is probed (which may be the reset value as
> -given in the hardware reference manual, or a value configured by the boot
> -loader).
> -
> -Example (NEMC node with a NAND child device attached at CS1):
> -
> -nemc: nemc@13410000 {
> - compatible = "ingenic,jz4780-nemc";
> - reg = <0x13410000 0x10000>;
> -
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> - ranges = <1 0 0x1b000000 0x1000000
> - 2 0 0x1a000000 0x1000000
> - 3 0 0x19000000 0x1000000
> - 4 0 0x18000000 0x1000000
> - 5 0 0x17000000 0x1000000
> - 6 0 0x16000000 0x1000000>;
> -
> - clocks = <&cgu JZ4780_CLK_NEMC>;
> -
> - nand: nand@1 {
> - compatible = "ingenic,jz4780-nand";
> - reg = <1 0 0x1000000>;
> -
> - ingenic,nemc-tAS = <10>;
> - ingenic,nemc-tAH = <5>;
> - ingenic,nemc-tBP = <10>;
> - ingenic,nemc-tAW = <15>;
> - ingenic,nemc-tSTRV = <100>;
> -
> - ...
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
> new file mode 100644
> index 000000000000..682e6f7e74fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-client.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> + Ingenic SoCs NAND / External Memory Controller (NEMC)
> + client-specific properties
> +
> +maintainers:
> + - Paul Cercueil <paul@crapouillou.net>
> +
> +description:
> + This document lists the various properties that child nodes of the NEMC node
> + can use.
> +
> +properties:

What about 'reg'? That should be required.

> + ingenic,nemc-bus-width:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [8, 16]
> + description: Specifies the bus width in bits.
> +
> + ingenic,nemc-tAS:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Address setup time in nanoseconds.
> +
> + ingenic,nemc-tAH:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Address hold time in nanoseconds.
> +
> + ingenic,nemc-tBP:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Burst pitch time in nanoseconds.
> +
> + ingenic,nemc-tAW:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Address wait time in nanoseconds.
> +
> + ingenic,nemc-tSTRV:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Static memory recovery time in nanoseconds.

I think I'd just combine this into 1 file.

> +
> +...
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
> new file mode 100644
> index 000000000000..c7fd28462fd8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
> +
> +maintainers:
> + - Paul Cercueil <paul@crapouillou.net>
> +
> +properties:
> + $nodename:
> + pattern: "^memory-controller@[0-9a-f]+$"
> +
> + compatible:
> + oneOf:
> + - enum:
> + - ingenic,jz4740-nemc
> + - ingenic,jz4780-nemc
> + - items:
> + - const: ingenic,jz4725b-nemc
> + - const: ingenic,jz4740-nemc
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 1
> +
> + ranges: true
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> +patternProperties:
> + "^(nand-controller|ethernet)@[0-9]+$":

Presumably you could have other types of child nodes?

> + type: object
> + allOf:
> + - $ref: ingenic,nemc-client.yaml#
> +
> +required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> + - ranges
> + - reg
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/jz4780-cgu.h>
> + #include <dt-bindings/gpio/gpio.h>
> + nemc: memory-controller@13410000 {
> + compatible = "ingenic,jz4780-nemc";
> + reg = <0x13410000 0x10000>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <1 0 0x1b000000 0x1000000>,
> + <2 0 0x1a000000 0x1000000>,
> + <3 0 0x19000000 0x1000000>,
> + <4 0 0x18000000 0x1000000>,
> + <5 0 0x17000000 0x1000000>,
> + <6 0 0x16000000 0x1000000>;
> +
> + clocks = <&cgu JZ4780_CLK_NEMC>;
> +
> + ethernet@6 {
> + compatible = "davicom,dm9000";
> + davicom,no-eeprom;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pins_nemc_cs6>;
> +
> + reg = <6 0 1>, /* addr */
> + <6 2 1>; /* data */
> +
> + ingenic,nemc-tAS = <15>;
> + ingenic,nemc-tAH = <10>;
> + ingenic,nemc-tBP = <20>;
> + ingenic,nemc-tAW = <50>;
> + ingenic,nemc-tSTRV = <100>;
> +
> + reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
> + vcc-supply = <&eth0_power>;
> +
> + interrupt-parent = <&gpe>;
> + interrupts = <19 4>;
> + };
> + };
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-05-12 00:55    [W:2.737 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site