lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 7/9] w1_therm: optimizing temperature read timings
Date
Optimizing temperature reading by reducing waiting conversion time
according to device resolution settings, as per device specification.
This is device dependent as not all the devices supports resolution
setting, so it has been added in device family structures.

The process to read the temperature on the device has been adapted in a
new function 'convert_t()', which replace the former 'read_therm()', is
introduce to deal with this timing. Strong pull up is also applied during
the required time, according to device power status needs and
'strong_pullup' module parameter.

'temperature_from_RAM()' function is introduced to get the correct
temperature computation (device dependent) from device RAM data.

An new sysfs entry has been added to ouptut only temperature. The old
entry w1_slave has been kept for compatibility, without changing its
output format.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
---
Changes in v5:
- All patch serie in one .c file
- Correcting some comments
- adding <linux/string.h> include
Changes in v6:
- Formatting code comments according to kernel-doc requirements
Changes in v7:
- Formatting code comments and correcting comments mistakes

.../ABI/testing/sysfs-driver-w1_therm | 12 +
drivers/w1/slaves/w1_therm.c | 286 +++++++++++-------
2 files changed, 197 insertions(+), 101 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
index 8b7ee89..6ffd3e3 100644
--- a/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -41,6 +41,18 @@ Users: any user space application which wants to communicate with
w1_term device


+What: /sys/bus/w1/devices/.../temperature
+Date: May 2020
+Contact: Akira Shimahara <akira215corp@gmail.com>
+Description:
+ (RO) return the temperature in 1/1000 degC.
+ Note that the conversion duration depend on the resolution (if
+ device support this feature). It takes 94ms in 9bits
+ resolution, 750ms for 12bits.
+Users: any user space application which wants to communicate with
+ w1_term device
+
+
What: /sys/bus/w1/devices/.../w1_slave
Date: May 2020
Contact: Akira Shimahara <akira215corp@gmail.com>
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 957b503..46756ea 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -93,6 +93,7 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0);
* @reserved: not used here
* @f: pointer to the device binding structure
* @convert: pointer to the device conversion function
+ * @get_conversion_time: pointer to the device conversion time function
* @set_resolution: pointer to the device set_resolution function
* @get_resolution: pointer to the device get_resolution function
*/
@@ -101,6 +102,7 @@ struct w1_therm_family_converter {
u16 reserved;
struct w1_family *f;
int (*convert)(u8 rom[9]);
+ int (*get_conversion_time)(struct w1_slave *sl);
int (*set_resolution)(struct w1_slave *sl, int val);
int (*get_resolution)(struct w1_slave *sl);
};
@@ -153,6 +155,15 @@ struct therm_info {
*/
static int reset_select_slave(struct w1_slave *sl);

+/**
+ * convert_t() - Query the device for temperature conversion and read
+ * @sl: pointer to the slave to read
+ * @info: pointer to a structure to store the read results
+ *
+ * Return: 0 if success, -kernel error code otherwise
+ */
+static int convert_t(struct w1_slave *sl, struct therm_info *info);
+
/**
* read_scratchpad() - read the data in device RAM
* @sl: pointer to the slave to read
@@ -213,6 +224,9 @@ static ssize_t w1_slave_store(struct device *device,
static ssize_t w1_seq_show(struct device *device,
struct device_attribute *attr, char *buf);

+static ssize_t temperature_show(struct device *device,
+ struct device_attribute *attr, char *buf);
+
static ssize_t ext_power_show(struct device *device,
struct device_attribute *attr, char *buf);

@@ -229,6 +243,7 @@ static ssize_t eeprom_store(struct device *device,

static DEVICE_ATTR_RW(w1_slave);
static DEVICE_ATTR_RO(w1_seq);
+static DEVICE_ATTR_RO(temperature);
static DEVICE_ATTR_RO(ext_power);
static DEVICE_ATTR_RW(resolution);
static DEVICE_ATTR_WO(eeprom);
@@ -259,6 +274,7 @@ static void w1_therm_remove_slave(struct w1_slave *sl);

static struct attribute *w1_therm_attrs[] = {
&dev_attr_w1_slave.attr,
+ &dev_attr_temperature.attr,
&dev_attr_ext_power.attr,
&dev_attr_resolution.attr,
&dev_attr_eeprom.attr,
@@ -267,6 +283,7 @@ static struct attribute *w1_therm_attrs[] = {

static struct attribute *w1_ds18s20_attrs[] = {
&dev_attr_w1_slave.attr,
+ &dev_attr_temperature.attr,
&dev_attr_ext_power.attr,
&dev_attr_eeprom.attr,
NULL,
@@ -275,6 +292,7 @@ static struct attribute *w1_ds18s20_attrs[] = {
static struct attribute *w1_ds28ea00_attrs[] = {
&dev_attr_w1_slave.attr,
&dev_attr_w1_seq.attr,
+ &dev_attr_temperature.attr,
&dev_attr_ext_power.attr,
&dev_attr_resolution.attr,
&dev_attr_eeprom.attr,
@@ -389,6 +407,37 @@ static struct w1_family w1_therm_family_DS1825 = {

/* Device dependent func */

+static inline int w1_DS18B20_convert_time(struct w1_slave *sl)
+{
+ int ret;
+
+ if (!sl->family_data)
+ return -ENODEV; /* device unknown */
+
+ /* return time in ms for conversion operation */
+ switch (SLAVE_RESOLUTION(sl)) {
+ case 9:
+ ret = 95;
+ break;
+ case 10:
+ ret = 190;
+ break;
+ case 11:
+ ret = 375;
+ break;
+ case 12:
+ default:
+ ret = 750;
+ }
+ return ret;
+}
+
+static inline int w1_DS18S20_convert_time(struct w1_slave *sl)
+{
+ (void)(sl);
+ return 750; /* always 750ms for DS18S20 */
+}
+
static inline int w1_DS18B20_write_data(struct w1_slave *sl,
const u8 *data)
{
@@ -480,8 +529,10 @@ static inline int w1_DS18S20_convert_temp(u8 rom[9])
{
int t, h;

- if (!rom[7])
+ if (!rom[7]) {
+ pr_debug("%s: Invalid argument for conversion\n", __func__);
return 0;
+ }

if (rom[1] == 0)
t = ((s32)rom[0] >> 1)*1000;
@@ -500,34 +551,39 @@ static inline int w1_DS18S20_convert_temp(u8 rom[9])

static struct w1_therm_family_converter w1_therm_families[] = {
{
- .f = &w1_therm_family_DS18S20,
- .convert = w1_DS18S20_convert_temp,
- .set_resolution = NULL, /* no config register */
- .get_resolution = NULL, /* no config register */
+ .f = &w1_therm_family_DS18S20,
+ .convert = w1_DS18S20_convert_temp,
+ .get_conversion_time = w1_DS18S20_convert_time,
+ .set_resolution = NULL, /* no config register */
+ .get_resolution = NULL, /* no config register */
},
{
- .f = &w1_therm_family_DS1822,
- .convert = w1_DS18B20_convert_temp,
- .set_resolution = w1_DS18B20_set_resolution,
- .get_resolution = w1_DS18B20_get_resolution,
+ .f = &w1_therm_family_DS1822,
+ .convert = w1_DS18B20_convert_temp,
+ .get_conversion_time = w1_DS18B20_convert_time,
+ .set_resolution = w1_DS18B20_set_resolution,
+ .get_resolution = w1_DS18B20_get_resolution,
},
{
- .f = &w1_therm_family_DS18B20,
- .convert = w1_DS18B20_convert_temp,
- .set_resolution = w1_DS18B20_set_resolution,
- .get_resolution = w1_DS18B20_get_resolution,
+ .f = &w1_therm_family_DS18B20,
+ .convert = w1_DS18B20_convert_temp,
+ .get_conversion_time = w1_DS18B20_convert_time,
+ .set_resolution = w1_DS18B20_set_resolution,
+ .get_resolution = w1_DS18B20_get_resolution,
},
{
- .f = &w1_therm_family_DS28EA00,
- .convert = w1_DS18B20_convert_temp,
- .set_resolution = w1_DS18B20_set_resolution,
- .get_resolution = w1_DS18B20_get_resolution,
+ .f = &w1_therm_family_DS28EA00,
+ .convert = w1_DS18B20_convert_temp,
+ .get_conversion_time = w1_DS18B20_convert_time,
+ .set_resolution = w1_DS18B20_set_resolution,
+ .get_resolution = w1_DS18B20_get_resolution,
},
{
- .f = &w1_therm_family_DS1825,
- .convert = w1_DS18B20_convert_temp,
- .set_resolution = w1_DS18B20_set_resolution,
- .get_resolution = w1_DS18B20_get_resolution,
+ .f = &w1_therm_family_DS1825,
+ .convert = w1_DS18B20_convert_temp,
+ .get_conversion_time = w1_DS18B20_convert_time,
+ .set_resolution = w1_DS18B20_set_resolution,
+ .get_resolution = w1_DS18B20_get_resolution,
}
};

@@ -582,24 +638,44 @@ static inline bool bus_mutex_lock(struct mutex *lock)
}

/**
- * w1_convert_temp() - temperature conversion binding function
- * @rom: data read from device RAM (8 data bytes + 1 CRC byte)
- * @fid: device family id
+ * conversion_time() - get the Tconv for the slave
+ * @sl: device to get the conversion time
*
- * The function call the temperature computation function according to
- * device family.
+ * On device supporting resolution settings, conversion time depend
+ * on the resolution setting. This helper function get the slave timing,
+ * depending on its current setting.
*
- * Return: value in millidegrees Celsius.
+ * Return: conversion time in ms, negative values are kernel error code
*/
-static inline int w1_convert_temp(u8 rom[9], u8 fid)
+static inline int conversion_time(struct w1_slave *sl)
{
- int i;
+ if (SLAVE_SPECIFIC_FUNC(sl))
+ return SLAVE_SPECIFIC_FUNC(sl)->get_conversion_time(sl);

- for (i = 0; i < ARRAY_SIZE(w1_therm_families); ++i)
- if (w1_therm_families[i].f->fid == fid)
- return w1_therm_families[i].convert(rom);
+ dev_info(&sl->dev,
+ "%s: Device not supported by the driver\n", __func__);

- return 0;
+ return -ENODEV; /* No device family */
+}
+
+/**
+ * temperature_from_RAM() - Convert the read info to temperature
+ * @sl: device that sent the RAM data
+ * @rom: read value on the slave device RAM
+ *
+ * Device dependent, the function bind the correct computation method.
+ *
+ * Return: temperature in 1/1000degC, 0 on error.
+ */
+static inline int temperature_from_RAM(struct w1_slave *sl, u8 rom[9])
+{
+ if (SLAVE_SPECIFIC_FUNC(sl))
+ return SLAVE_SPECIFIC_FUNC(sl)->convert(rom);
+
+ dev_info(&sl->dev,
+ "%s: Device not supported by the driver\n", __func__);
+
+ return 0; /* No device family */
}

/* Interface Functions */
@@ -679,96 +755,74 @@ static int reset_select_slave(struct w1_slave *sl)
return 0;
}

-static ssize_t read_therm(struct device *device,
- struct w1_slave *sl, struct therm_info *info)
+static int convert_t(struct w1_slave *sl, struct therm_info *info)
{
- struct w1_master *dev = sl->master;
- u8 external_power;
- int ret, max_trying = 10;
- u8 *family_data = sl->family_data;
+ struct w1_master *dev_master = sl->master;
+ int max_trying = W1_THERM_MAX_TRY;
+ int t_conv;
+ int ret = -ENODEV;
+ bool strong_pullup;

- if (!family_data) {
- ret = -ENODEV;
+ if (!sl->family_data)
goto error;
- }

- /* prevent the slave from going away in sleep */
- atomic_inc(THERM_REFCNT(family_data));
+ strong_pullup = (w1_strong_pullup == 2 ||
+ (!SLAVE_POWERMODE(sl) &&
+ w1_strong_pullup));

- ret = mutex_lock_interruptible(&dev->bus_mutex);
- if (ret != 0)
- goto dec_refcnt;
+ /* get conversion duration device and id dependent */
+ t_conv = conversion_time(sl);

memset(info->rom, 0, sizeof(info->rom));

- while (max_trying--) {
+ /* prevent the slave from going away in sleep */
+ atomic_inc(THERM_REFCNT(sl->family_data));
+
+ if (!bus_mutex_lock(&dev_master->bus_mutex)) {
+ ret = -EAGAIN; /* Didn't acquire the mutex */
+ goto dec_refcnt;
+ }
+
+ while (max_trying-- && ret) { /* ret should be 0 */

info->verdict = 0;
info->crc = 0;
-
+ /* safe version to select slave */
if (!reset_select_slave(sl)) {
- int count = 0;
- unsigned int tm = 750;
unsigned long sleep_rem;

- w1_write_8(dev, W1_READ_PSUPPLY);
- external_power = w1_read_8(dev);
-
- if (reset_select_slave(sl))
- continue;
-
/* 750ms strong pullup (or delay) after the convert */
- if (w1_strong_pullup == 2 ||
- (!external_power && w1_strong_pullup))
- w1_next_pullup(dev, tm);
-
- w1_write_8(dev, W1_CONVERT_TEMP);
+ if (strong_pullup)
+ w1_next_pullup(dev_master, t_conv);

- if (external_power) {
- mutex_unlock(&dev->bus_mutex);
+ w1_write_8(dev_master, W1_CONVERT_TEMP);

- sleep_rem = msleep_interruptible(tm);
+ if (strong_pullup) { /*some device need pullup */
+ sleep_rem = msleep_interruptible(t_conv);
if (sleep_rem != 0) {
ret = -EINTR;
- goto dec_refcnt;
+ goto mt_unlock;
}
+ mutex_unlock(&dev_master->bus_mutex);
+ } else { /*no device need pullup */
+ mutex_unlock(&dev_master->bus_mutex);

- ret = mutex_lock_interruptible(&dev->bus_mutex);
- if (ret != 0)
- goto dec_refcnt;
- } else if (!w1_strong_pullup) {
- sleep_rem = msleep_interruptible(tm);
+ sleep_rem = msleep_interruptible(t_conv);
if (sleep_rem != 0) {
ret = -EINTR;
- goto mt_unlock;
- }
- }
-
- if (!reset_select_slave(sl)) {
-
- w1_write_8(dev, W1_READ_SCRATCHPAD);
- count = w1_read_block(dev, info->rom, 9);
- if (count != 9) {
- dev_warn(device, "w1_read_block() "
- "returned %u instead of 9.\n",
- count);
+ goto dec_refcnt;
}
-
- info->crc = w1_calc_crc8(info->rom, 8);
-
- if (info->rom[8] == info->crc)
- info->verdict = 1;
}
+ ret = read_scratchpad(sl, info);
+ goto dec_refcnt;
}

- if (info->verdict)
- break;
}

mt_unlock:
- mutex_unlock(&dev->bus_mutex);
+ mutex_unlock(&dev_master->bus_mutex);
dec_refcnt:
- atomic_dec(THERM_REFCNT(family_data));
+ atomic_dec(THERM_REFCNT(sl->family_data));
error:
return ret;
}
@@ -1000,27 +1054,33 @@ static ssize_t w1_slave_show(struct device *device,
u8 *family_data = sl->family_data;
int ret, i;
ssize_t c = PAGE_SIZE;
- u8 fid = sl->family->fid;

- ret = read_therm(device, sl, &info);
- if (ret)
- return ret;
+ ret = convert_t(sl, &info);
+
+ if (ret < 0) {
+ dev_dbg(device,
+ "%s: Temperature data may be corrupted. err=%d\n",
+ __func__, ret);
+ return 0;
+ }

for (i = 0; i < 9; ++i)
c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", info.rom[i]);
c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n",
info.crc, (info.verdict) ? "YES" : "NO");
+
if (info.verdict)
memcpy(family_data, info.rom, sizeof(info.rom));
else
- dev_warn(device, "Read failed CRC check\n");
+ dev_warn(device, "%s:Read failed CRC check\n", __func__);

for (i = 0; i < 9; ++i)
c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ",
((u8 *)family_data)[i]);

c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
- w1_convert_temp(info.rom, fid));
+ temperature_from_RAM(sl, info.rom));
+
ret = PAGE_SIZE - c;
return ret;
}
@@ -1063,6 +1123,31 @@ static ssize_t w1_slave_store(struct device *device,
return size; /* always return size to avoid infinite calling */
}

+static ssize_t temperature_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct w1_slave *sl = dev_to_w1_slave(device);
+ struct therm_info info;
+ int ret = 0;
+
+ if ((!sl->family_data) || (!SLAVE_SPECIFIC_FUNC(sl))) {
+ dev_info(device,
+ "%s: Device not supported by the driver\n", __func__);
+ return 0; /* No device family */
+ }
+
+ ret = convert_t(sl, &info);
+
+ if (ret < 0) {
+ dev_dbg(device,
+ "%s: Temperature data may be corrupted. err=%d\n",
+ __func__, ret);
+ return 0;
+ }
+
+ return sprintf(buf, "%d\n", temperature_from_RAM(sl, info.rom));
+}
+
static ssize_t ext_power_show(struct device *device,
struct device_attribute *attr, char *buf)
{
@@ -1172,12 +1257,11 @@ static int w1_read_temp(struct device *device, u32 attr, int channel,
{
struct w1_slave *sl = dev_get_drvdata(device);
struct therm_info info;
- u8 fid = sl->family->fid;
int ret;

switch (attr) {
case hwmon_temp_input:
- ret = read_therm(device, sl, &info);
+ ret = convert_t(sl, &info);
if (ret)
return ret;

@@ -1186,7 +1270,7 @@ static int w1_read_temp(struct device *device, u32 attr, int channel,
return ret;
}

- *val = w1_convert_temp(info.rom, fid);
+ *val = temperature_from_RAM(sl, info.rom);
ret = 0;
break;
default:
--
2.26.2
\
 
 \ /
  Last update: 2020-05-11 22:38    [W:0.051 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site