lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH net-next 06/15] net: dsa: sja1105: allow VLAN configuration from the bridge in all states
    Date
    From: Vladimir Oltean <vladimir.oltean@nxp.com>

    Let the DSA core call our .port_vlan_add methods every time the bridge
    layer requests so. We will deal internally with saving/restoring VLANs
    depending on our VLAN awareness state.

    Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
    ---
    drivers/net/dsa/sja1105/sja1105_main.c | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
    index 8aa8bbcce6e3..15db37067bf1 100644
    --- a/drivers/net/dsa/sja1105/sja1105_main.c
    +++ b/drivers/net/dsa/sja1105/sja1105_main.c
    @@ -2340,6 +2340,7 @@ static int sja1105_setup(struct dsa_switch *ds)
    ds->num_tx_queues = SJA1105_NUM_TC;

    ds->mtu_enforcement_ingress = true;
    + ds->vlan_bridge_vtu = true;

    /* The DSA/switchdev model brings up switch ports in standalone mode by
    * default, and that means vlan_filtering is 0 since they're not under
    --
    2.17.1
    \
     
     \ /
      Last update: 2020-05-10 18:45    [W:6.451 / U:0.372 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site