lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 8/9] w1_therm: adding alarm sysfs entry
Date
Adding device alarms settings by a dedicated sysfs entry alarms (RW):
read or write TH and TL in the device RAM. Checking devices in alarm
state could be performed using the master search command.

As alarms temperature level are store in a 8 bit register on the device
and are signed values, a safe cast shall be performed using the min and
max temperature that device are able to measure. This is done by
int_to_short inline function.

A 'write_data' field is added in the device structure, to bind the
correct writing function, as some devices may have 2 or 3 bytes RAM.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
---
Changes in v5:
- All patch serie in one .c file
- Correcting some comments
- adding <linux/string.h> include
Changes in v6:
- Formatting code comments according to kernel-doc requirements

.../ABI/testing/sysfs-driver-w1_therm | 16 ++
drivers/w1/slaves/w1_therm.c | 160 ++++++++++++++++++
2 files changed, 176 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
index 6ffd3e3..f289520 100644
--- a/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -1,3 +1,19 @@
+What: /sys/bus/w1/devices/.../alarms
+Date: May 2020
+Contact: Akira Shimahara <akira215corp@gmail.com>
+Description:
+ (RW) read or write TH and TL (Temperature High an Low) alarms.
+ Values shall be space separated and in the device range
+ (typical -55 degC to 125 degC), if not values will be trimmed
+ to device min/max capabilities. Values are integer as they are
+ stored in a 8bit register in the device. Lowest value is
+ automatically put to TL. Once set, alarms could be search at
+ master level, refer to Documentation/w1/w1_generic.rst for
+ detailed information
+Users: any user space application which wants to communicate with
+ w1_term device
+
+
What: /sys/bus/w1/devices/.../eeprom
Date: May 2020
Contact: Akira Shimahara <akira215corp@gmail.com>
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 93855ca..1301b16 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -57,6 +57,9 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0);
#define EEPROM_CMD_WRITE "save" /* cmd for write eeprom sysfs */
#define EEPROM_CMD_READ "restore" /* cmd for read eeprom sysfs */

+#define MIN_TEMP -55 /* min temperature that can be mesured */
+#define MAX_TEMP 125 /* max temperature that can be mesured */
+
/* Helpers Macros */

/* return a pointer on the slave w1_therm_family_converter struct:
@@ -92,6 +95,7 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0);
* @get_conversion_time: pointer to the device conversion time function
* @set_resolution: pointer to the device set_resolution function
* @get_resolution: pointer to the device get_resolution function
+ * @write_data: pointer to the device writing function (2 or 3 bytes)
*/
struct w1_therm_family_converter {
u8 broken;
@@ -101,6 +105,7 @@ struct w1_therm_family_converter {
int (*get_conversion_time)(struct w1_slave *sl);
int (*set_resolution)(struct w1_slave *sl, int val);
int (*get_resolution)(struct w1_slave *sl);
+ int (*write_data)(struct w1_slave *sl, const u8 *data);
};

/**
@@ -235,6 +240,12 @@ static ssize_t resolution_store(struct device *device,
static ssize_t eeprom_store(struct device *device,
struct device_attribute *attr, const char *buf, size_t size);

+static ssize_t alarms_store(struct device *device,
+ struct device_attribute *attr, const char *buf, size_t size);
+
+static ssize_t alarms_show(struct device *device,
+ struct device_attribute *attr, char *buf);
+
/* Attributes declarations */

static DEVICE_ATTR_RW(w1_slave);
@@ -243,6 +254,7 @@ static DEVICE_ATTR_RO(temperature);
static DEVICE_ATTR_RO(ext_power);
static DEVICE_ATTR_RW(resolution);
static DEVICE_ATTR_WO(eeprom);
+static DEVICE_ATTR_RW(alarms);

/* Interface Functions declaration */

@@ -274,6 +286,7 @@ static struct attribute *w1_therm_attrs[] = {
&dev_attr_ext_power.attr,
&dev_attr_resolution.attr,
&dev_attr_eeprom.attr,
+ &dev_attr_alarms.attr,
NULL,
};

@@ -282,6 +295,7 @@ static struct attribute *w1_ds18s20_attrs[] = {
&dev_attr_temperature.attr,
&dev_attr_ext_power.attr,
&dev_attr_eeprom.attr,
+ &dev_attr_alarms.attr,
NULL,
};

@@ -292,6 +306,7 @@ static struct attribute *w1_ds28ea00_attrs[] = {
&dev_attr_ext_power.attr,
&dev_attr_resolution.attr,
&dev_attr_eeprom.attr,
+ &dev_attr_alarms.attr,
NULL,
};

@@ -537,6 +552,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
.get_conversion_time = w1_DS18S20_convert_time,
.set_resolution = NULL, // no config register
.get_resolution = NULL, // no config register
+ .write_data = w1_DS18S20_write_data,
},
{
.f = &w1_therm_family_DS1822,
@@ -544,6 +560,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
.get_conversion_time = w1_DS18B20_convert_time,
.set_resolution = w1_DS18B20_set_resolution,
.get_resolution = w1_DS18B20_get_resolution,
+ .write_data = w1_DS18B20_write_data,
},
{
.f = &w1_therm_family_DS18B20,
@@ -551,6 +568,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
.get_conversion_time = w1_DS18B20_convert_time,
.set_resolution = w1_DS18B20_set_resolution,
.get_resolution = w1_DS18B20_get_resolution,
+ .write_data = w1_DS18B20_write_data,
},
{
.f = &w1_therm_family_DS28EA00,
@@ -558,6 +576,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
.get_conversion_time = w1_DS18B20_convert_time,
.set_resolution = w1_DS18B20_set_resolution,
.get_resolution = w1_DS18B20_get_resolution,
+ .write_data = w1_DS18B20_write_data,
},
{
.f = &w1_therm_family_DS1825,
@@ -565,6 +584,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
.get_conversion_time = w1_DS18B20_convert_time,
.set_resolution = w1_DS18B20_set_resolution,
.get_resolution = w1_DS18B20_get_resolution,
+ .write_data = w1_DS18B20_write_data,
}
};

@@ -659,6 +679,26 @@ static inline int temperature_from_RAM(struct w1_slave *sl, u8 rom[9])
return 0; /* No device family */
}

+/**
+ * int_to_short() - Safe casting of int to short
+ *
+ * @i: integer to be converted to short
+ *
+ * Device register use 1 byte to store signed integer.
+ * This helper function convert the int in a signed short,
+ * using the min/max values that device can measure as limits.
+ * min/max values are defined by macro.
+ *
+ * Return: a short in the range of min/max value
+ */
+static inline s8 int_to_short(int i)
+{
+ /* Prepare to cast to short by eliminating out of range values */
+ i = i > MAX_TEMP ? MAX_TEMP : i;
+ i = i < MIN_TEMP ? MIN_TEMP : i;
+ return (s8) i;
+}
+
/* Interface Functions */

static int w1_therm_add_slave(struct w1_slave *sl)
@@ -1230,6 +1270,126 @@ static ssize_t eeprom_store(struct device *device,
return size;
}

+static ssize_t alarms_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct w1_slave *sl = dev_to_w1_slave(device);
+ int ret = -ENODEV;
+ s8 th = 0, tl = 0;
+ struct therm_info scratchpad;
+
+ ret = read_scratchpad(sl, &scratchpad);
+
+ if (!ret) {
+ th = scratchpad.rom[2]; // TH is byte 2
+ tl = scratchpad.rom[3]; // TL is byte 3
+ } else {
+ dev_info(device,
+ "%s: error reading alarms register %d\n",
+ __func__, ret);
+ }
+
+ return sprintf(buf, "%hd %hd\n", tl, th);
+}
+
+static ssize_t alarms_store(struct device *device,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct w1_slave *sl = dev_to_w1_slave(device);
+ struct therm_info info;
+ u8 new_config_register[3]; /* array of data to be written */
+ int temp, ret = -EINVAL;
+ char *token = NULL;
+ s8 tl, th, tt; /* 1 byte per value + temp ring order */
+ char *p_args = kmalloc(size, GFP_KERNEL);
+
+ /* Safe string copys as buf is const */
+ if (!p_args) {
+ dev_warn(device,
+ "%s: error unable to allocate memory %d\n",
+ __func__, -ENOMEM);
+ return size;
+ }
+ strcpy(p_args, buf);
+
+ /* Split string using space char */
+ token = strsep(&p_args, " ");
+
+ if (!token) {
+ dev_info(device,
+ "%s: error parsing args %d\n", __func__, -EINVAL);
+ goto free_m;
+ }
+
+ /* Convert 1st entry to int */
+ ret = kstrtoint (token, 10, &temp);
+ if (ret) {
+ dev_info(device,
+ "%s: error parsing args %d\n", __func__, ret);
+ goto free_m;
+ }
+
+ tl = int_to_short(temp);
+
+ /* Split string using space char */
+ token = strsep(&p_args, " ");
+ if (!token) {
+ dev_info(device,
+ "%s: error parsing args %d\n", __func__, -EINVAL);
+ goto free_m;
+ }
+ /* Convert 2nd entry to int */
+ ret = kstrtoint (token, 10, &temp);
+ if (ret) {
+ dev_info(device,
+ "%s: error parsing args %d\n", __func__, ret);
+ goto free_m;
+ }
+
+ /* Prepare to cast to short by eliminating out of range values */
+ th = int_to_short(temp);
+
+ /* Reorder if required th and tl */
+ if (tl > th) {
+ tt = tl; tl = th; th = tt;
+ }
+
+ /* Read the scratchpad to change only the required bits
+ * (th : byte 2 - tl: byte 3)
+ */
+ ret = read_scratchpad(sl, &info);
+ if (!ret) {
+ new_config_register[0] = th; // Byte 2
+ new_config_register[1] = tl; // Byte 3
+ new_config_register[2] = info.rom[4];// Byte 4
+ } else {
+ dev_info(device,
+ "%s: error reading from the slave device %d\n",
+ __func__, ret);
+ goto free_m;
+ }
+
+ /* Write data in the device RAM */
+ if (!SLAVE_SPECIFIC_FUNC(sl)) {
+ dev_info(device,
+ "%s: Device not supported by the driver %d\n",
+ __func__, -ENODEV);
+ goto free_m;
+ }
+
+ ret = SLAVE_SPECIFIC_FUNC(sl)->write_data(sl, new_config_register);
+ if (ret)
+ dev_info(device,
+ "%s: error writing to the slave device %d\n",
+ __func__, ret);
+
+free_m:
+ /* free allocated memory */
+ kfree(p_args);
+
+ return size;
+}
+
#if IS_REACHABLE(CONFIG_HWMON)
static int w1_read_temp(struct device *device, u32 attr, int channel,
long *val)
--
2.26.2
\
 
 \ /
  Last update: 2020-05-10 16:19    [W:0.032 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site