lkml.org 
[lkml]   [2020]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v4 0/2] provide support for PHY master/slave configuration
Date
changes v3:
- rename port_mode to master_slave
- move validation code to net/ethtool/linkmodes.c
- add UNSUPPORTED state and avoid sending unsupported fields
- more formatting and naming fixes
- tja11xx: support only force mode
- tja11xx: mark state as unsupported

changes v3:
- provide separate field for config and state.
- make state rejected on set
- add validation

changes v2:
- change names. Use MASTER_PREFERRED instead of MULTIPORT
- configure master/slave only on request. Default configuration can be
provided by PHY or eeprom
- status and configuration to the user space.

Oleksij Rempel (2):
ethtool: provide UAPI for PHY master/slave configuration.
net: phy: tja11xx: add support for master-slave configuration

Documentation/networking/ethtool-netlink.rst | 35 ++++----
drivers/net/phy/nxp-tja11xx.c | 47 +++++++++-
drivers/net/phy/phy.c | 4 +-
drivers/net/phy/phy_device.c | 95 ++++++++++++++++++++
include/linux/phy.h | 3 +
include/uapi/linux/ethtool.h | 16 +++-
include/uapi/linux/ethtool_netlink.h | 2 +
include/uapi/linux/mii.h | 2 +
net/ethtool/linkmodes.c | 48 ++++++++++
9 files changed, 233 insertions(+), 19 deletions(-)

--
2.26.2

\
 
 \ /
  Last update: 2020-05-01 09:47    [W:0.366 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site