lkml.org 
[lkml]   [2020]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
On Thu, Apr 09, 2020 at 07:49:52AM -0400, Alan Cooper wrote:
> On Thu, Apr 9, 2020 at 5:08 AM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Thu, Apr 9, 2020 at 12:52 AM Al Cooper <alcooperx@gmail.com> wrote:
> > >
> > > Add the build system changes needed to get the Broadcom STB XHCI,
> > > EHCI and OHCI functionality working. The OHCI support does not
> > > require anything unique to Broadcom so the standard ohci-platform
> > > driver is being used. The link order for XHCI was changed in the
> > > Makefile because of the way STB XHCI, EHCI and OHCI controllers
> > > share a port which requires that the XHCI driver be initialized
> > > first. Also update MAINTAINERS.
> >
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -3477,6 +3477,14 @@ S: Supported
> > > F: drivers/i2c/busses/i2c-brcmstb.c
> > > F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
> > >
> > > +BROADCOM BRCMSTB USB EHCI DRIVER
> > > +M: Al Cooper <alcooperx@gmail.com>
> > > +L: linux-usb@vger.kernel.org
> > > +L: bcm-kernel-feedback-list@broadcom.com
> > > +S: Maintained
> > > +F: drivers/usb/host/ehci-brcm.*
> > > +F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> >
> > This has ordering issues.
> > Run parse-maintainer.pl to fix. (Note, it creates by default a new
> > file, you might need to run diff manually to see the difference).
>
> I'm not sure what you mean.
> I ran "./scripts/parse-maintainers.pl" and did "diff MAINTAINERS
> MAINTAINERS.new" and there are no differences in or around my entry.

Perhaps --order should be added.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-04-09 14:30    [W:0.056 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site