lkml.org 
[lkml]   [2020]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] dt-bindings: clk: Add Baikal-T1 CCU PLLs bindings
Hello Stephen,

Sorry for a delayed response. My answers to your comments are below.

On Mon, Mar 09, 2020 at 07:02:27PM -0700, Stephen Boyd wrote:
> Quoting Sergey.Semin@baikalelectronics.ru (2020-03-06 05:00:44)
> > From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >
> > Baikal-T1 Clocks Control Unit is responsible for transformation of a
> > signal coming from an external oscillator into clocks of various
> > frequencies to propagate them then to the corresponding clocks
> > consumers (either individual IP-blocks or clock domains). In order
> > to create a set of high-frequency clocks the external signal is
> > firstly handled by the embedded into CCU PLLs. So the corresponding
> > dts-node is just a normal clock-provider node with standard set of
> > properties.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
>
> SoB chain is backwards. Is Alexey the author? Or Co-developed-by?

Thanks for noticing this. I'll rearrange the SoB's in v2.

>
> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > Cc: Paul Burton <paulburton@kernel.org>
> > Cc: Ralf Baechle <ralf@linux-mips.org>
> > ---
> > .../bindings/clock/be,bt1-ccu-pll.yaml | 139 ++++++++++++++++++
> > include/dt-bindings/clock/bt1-ccu.h | 17 +++
> > 2 files changed, 156 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/be,bt1-ccu-pll.yaml
> > create mode 100644 include/dt-bindings/clock/bt1-ccu.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/be,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/be,bt1-ccu-pll.yaml
> > new file mode 100644
> > index 000000000000..f2e397cc147b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/be,bt1-ccu-pll.yaml
> > @@ -0,0 +1,139 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# Copyright (C) 2019 - 2020 BAIKAL ELECTRONICS, JSC
> > +#
> > +# Baikal-T1 Clocks Control Unit PLL Device Tree Bindings.
> > +#
>
> I don't think we need any of these comments besides the license
> identifier line. Can you dual license this?
>

It's normal to have a copyright here, but in a single-lined form.
I'll do this in v2 and also dual license the binding file.

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/be,bt1-ccu-pll.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Baikal-T1 Clock Control Unit PLLs
> > +
> > +maintainers:
> > + - Serge Semin <fancer.lancer@gmail.com>
> > +
> > +description: |
> > + Clocks Control Unit is the core of Baikal-T1 SoC responsible for the chip
> > + subsystems clocking and resetting. The CCU is connected with an external
> > + fixed rate oscillator, which signal is transformed into clocks of various
> > + frequencies and then propagated to either individual IP-blocks or to groups
> > + of blocks (clock domains). The transformation is done by means of PLLs and
> > + gateable/non-gateable dividers embedded into the CCU. It's logically divided
> > + into the next components:
> > + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
> > + in general can provide any frequency supported by the CCU PLLs).
> > + 2) PLLs clocks generators (PLLs) - described in this bindings file.
> > + 3) AXI-bus clock dividers (AXI).
> > + 4) System devices reference clock dividers (SYS).
> > + which are connected with each other as shown on the next figure:
>
> Please add a newline here

Ok.

>
> > + +---------------+
> > + | Baikal-T1 CCU |
> > + | +----+------|- MIPS P5600 cores
> > + | +-|PLLs|------|- DDR controller
> > + | | +----+ |
> > + +----+ | | | | |
> > + |XTAL|--|-+ | | +---+-|
> > + +----+ | | | +-|AXI|-|- AXI-bus
> > + | | | +---+-|
> > + | | | |
> > + | | +----+---+-|- APB-bus
> > + | +-------|SYS|-|- Low-speed Devices
> > + | +---+-|- High-speed Devices
> > + +---------------+
>
> And here.
>

Ok

> > + Each CCU sub-block is represented as a separate dts-node and has an
> > + individual driver to be bound with.
> > +
> > + In order to create signals of wide range frequencies the external oscillator
> > + output is primarily connected to a set of CCU PLLs. There are five PLLs
> > + to create a clock for the MIPS P5600 cores, the embedded DDR controller,
> > + SATA, Ethernet and PCIe domains. The last three domains though named by the
> > + biggest system interfaces in fact include nearly all of the rest SoC
> > + peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
> > + with an interface wrapper (so called safe PLL' clocks switcher) to simplify
> > + the PLL configuration procedure. The PLLs work as depicted on the next
> > + diagram:
>
> Same, space out the diagrams.
>

Ok

> > + +--------------------------+
> > + | |
> > + +-->+---+ +---+ +---+ | +---+ 0|\
> > + CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
> > + +---+ +->+---+ +---+ /->+---+ | |--->CLKOUT
> > + CLKOD---------C----------------+ 1| |
> > + +--------C--------------------------->|/
> > + | | ^
> > + Rclk-+->+---+ | |
> > + CLKR--->|/NR|-+ |
> > + +---+ |
> > + BYPASS--------------------------------------+
> > + BWADJ--->
> > + where Rclk is the reference clock coming from XTAL, NR - reference clock
> > + divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
> > + output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
> > + the binding supports the PLL dividers configuration in accordance with a
> > + requested rate, while bypassing and bandwidth adjustment settings can be
> > + added in future if it gets to be necessary.
> > +
> > + The PLLs CLKOUT is then either directly connected with the corresponding
> > + clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
> > + divider to create a signal required for the clock domain.
> > +
> > + The CCU PLL dts-node uses the common clock bindings [1] with no custom
> > + parameters. The list of exported clocks can be found in
> > + 'dt-bindings/clock/bt1-ccu.h'.
> > +
> > + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>
> Don't think we need to mention this binding anymore. But it's good that
> we know what exported clock ids are.
>

Ok. I'll remove the legacy text binding file mention here and retain the
reference to the header file with the clock IDs defined. The similar
thing will be done for the others bindings in the patchset.

> > +
> > +allOf:
> > + - $ref: /schemas/clock/clock.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: be,bt1-ccu-pll
> > +

> > + reg:
> > + description: CCU PLLs sub-block base address.
> > + maxItems: 1
> > +

Sometime ago I sent a RFC to Rob and you being in Cc there:
https://lkml.org/lkml/2020/3/22/393
Simply speaking there are several issues raised in comments to different
patchsets, which are indirectly connected with the Baikal-T1 System Controller
DT node design I've initially chosen. In accordance with that I've spread its
functional blocks into different DT nodes with no reference to being related
to the System Controller. Clock Control Unit nodes are amongst these blocks.
Seeing such design caused these issues I suggested an alternative solution
of having a single System Controller node and multiple functional sub-nodes.
These sub-nodes will include the Clock Control Unit PLLs, AXI-bus and System
Device blocks. I thoroughly described the solution in the RFC. So if no
arguments against it pop up soon in the RFC comments, I'll implement it in
v2 of this patchset as well. This solution cause the reg-property removal
from this binding. Instead the drivers shall refer to the parental syscon
node to get a regmap with CCU registers from it.

> > + "#clock-cells":
> > + description: |
> > + Clocks are referenced by the node phandle and an unique identifier
> > + from 'dt-bindings/clock/bt1-ccu.h'.
>
> Don't think we need this description.

Agreed.

>
> > + const: 1
> > +
> > + clocks:
> > + description: Phandle of CCU External reference clock.
> > + maxItems: 1
> > +
> > + clock-names:
> > + const: ref_clk
>
> Can we drop _clk? It's redundant.

I would leave this and "pcie_clk", "sata_clk", "eth_clk" declared in the
next two bindings as is, since this way they would exactly match the names
used in the documentation. The same thing is with the clock-output-names
property values.

I've seen such names in many other drivers/bindings including the
bindings in the clock subsystem even submitted rather recently, not to
mention the names like "aclk", "pclk", etc used all over the dt nodes.
Are there any requirements in naming the clocks? Should I avoid using the
'_clk' clock names suffix in accordance with them? If so, please point
me out to that requirement in docs for future reference.

Normally If I don't find something in the requirements documented in the kernel,
I use either a commonly utilized practice seen in other similar drivers, or
select a solution which seems better to me like providing a better readability
and code understanding.

>
> > +
> > + clock-output-names: true
> > +
> > + assigned-clocks: true
> > +
> > + assigned-clock-rates: true
> > +
> > +additionalProperties: false
> > +

I'll also replace these four properties with a single
"unevaluatedProperties: false". In the framework of other patchset
review Rob said this property is more suitable in such situations and
will get to be supported by the dt_binding_check script eventually.

> > +required:
> > + - compatible
> > + - reg
> > + - "#clock-cells"
> > + - clocks
> > + - clock-names
> > +
> > +examples:
> > + - |
> > + ccu_pll: ccu_pll@1F04D000 {
>
> Drop the phandle unless it's actually used.

Do you mean the label definition? If so, Ok. I'll remove it.

Unit-address will be also lowercased if I don't remove the reg property
from here. As I said in RFC in accordance with the alternative solution
this node will be a sub-node of the system controller, which regmap will
be used instead of the individual reg-property definition. So if the
reg-property is removed from the node, the unit-address will be also
discarded from here.

>
> > + compatible = "be,bt1-ccu-pll";
> > + reg = <0x1F04D000 0x028>;
>
> Lowercase hex please. That size is oddly small.

It's small due to be range being part of the system controller registers
set. I've briefly described this above and thoroughly - in the RFC.
Please see the RFC text and send your comments regarding an alternative
solution there shall you have any.

Anyway if no comments are received there soon, I'll remove the reg
property from here. The PLL driver will refer to the parental system
controller to get the registers regmap handler.

>
> > + #clock-cells = <1>;
> > +
> > + clocks = <&osc25>;
> > + clock-names = "ref_clk";
> > +
> > + clock-output-names = "cpu_pll", "sata_pll", "ddr_pll",
> > + "pcie_pll", "eth_pll";
> > + };
> > +...
> > diff --git a/include/dt-bindings/clock/bt1-ccu.h b/include/dt-bindings/clock/bt1-ccu.h
> > new file mode 100644
> > index 000000000000..86e63162ade0
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/bt1-ccu.h
> > @@ -0,0 +1,17 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2019 BAIKAL ELECTRONICS, JSC
> > + *
> > + * Baikal-T1 CCU clock indeces.
> > + */
> > +#ifndef __DT_BINDINGS_CLOCK_BT1_CCU_H
> > +#define __DT_BINDINGS_CLOCK_BT1_CCU_H
> > +
> > +/* Baikal-T1 CCU PLL indeces. */
>
> Please drop this comment. It's not useful.

Ok.

Regards,
-Sergey

>
> > +#define CCU_CPU_PLL 0
> > +#define CCU_SATA_PLL 1
> > +#define CCU_DDR_PLL 2
> > +#define CCU_PCIE_PLL 3
> > +#define CCU_ETH_PLL 4
> > +
> > +#endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */
> > --
> > 2.25.1
> >

\
 
 \ /
  Last update: 2020-04-05 12:01    [W:0.104 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site