lkml.org 
[lkml]   [2020]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/7] arm64: dts: allwinner: h6: Enable CPU and GPU opp tables for Beelink GS1
Date
Enable CPU and GPU opp tables for Beelink GS1.

This needs to change the CPU regulator max voltage to fit
the OPP table.

Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
.../arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index df6d872c34e2..d76a0dd75222 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -4,6 +4,8 @@
/dts-v1/;

#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -70,6 +72,10 @@
};
};

+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
&de {
status = "okay";
};
@@ -227,7 +233,8 @@
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};

@@ -235,6 +242,7 @@
regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};

--
2.20.1
\
 
 \ /
  Last update: 2020-04-05 19:36    [W:0.125 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site