lkml.org 
[lkml]   [2020]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH 3/7] arm64: dts: allwinner: h6: set thermal polling time
Hi Ondřej,

On Sun, 5 Apr 2020 at 13:24, Ondřej Jirman <megous@megous.com> wrote:
>
> Hello,
>
> On Sun, Apr 05, 2020 at 12:49:09PM +0200, Clément Péron wrote:
> > Add reasonable thermal polling time for Allwinner H6.
> >
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > index d4d3963705f5..c3e4f09f60ce 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > @@ -905,8 +905,8 @@
> >
> > thermal-zones {
> > cpu-thermal {
> > - polling-delay-passive = <0>;
> > - polling-delay = <0>;
> > + polling-delay-passive = <100>;
> > + polling-delay = <1000>;
> > thermal-sensors = <&ths 0>;
>
> This is not necessary, and will not do anything useful, since the driver
> uses interrupts to update the thermal zone's temperature. Please keep the
> values at 0.
>
> With your settings the thermal zone would just add a polling timer in addition
> to being updated every 250ms via THS interrupt. The real thermal measurements
> are available every 250ms anyway, so setting a smaller period here will not do
> anything useful, and 1s period will not lead to slower updates either.
>
> Values of 0 mean tell the thermal zone to rely on thermal driver to update
> the thermal zone by itself (via interrupt) and to not poll.

Thanks for the explanations,
I will drop this patch.

Regards,
Clément
>
> regards,
> o.
>
> > trips {
> > @@ -935,8 +935,8 @@
> > };
> >
> > gpu-thermal {
> > - polling-delay-passive = <0>;
> > - polling-delay = <0>;
> > + polling-delay-passive = <100>;
> > + polling-delay = <1000>;
> > thermal-sensors = <&ths 1>;
> > };
> > };
> > --
> > 2.20.1
> >
> > --
> > You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200405104913.22806-4-peron.clem%40gmail.com.

\
 
 \ /
  Last update: 2020-04-05 16:36    [W:0.041 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site