lkml.org 
[lkml]   [2020]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH linux hwmon-next v3 3/3] dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings
From
Document device tree bindings for AMD SB-TSI emulated temperature
sensor.

Signed-off-by: Kun Yi <kunyi@google.com>
---
.../devicetree/bindings/hwmon/amd,sbtsi.txt | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/amd,sbtsi.txt

diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.txt b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.txt
new file mode 100644
index 000000000000..be7293c43c0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.txt
@@ -0,0 +1,26 @@
+* Sideband interface Temperature Sensor Interface (SB-TSI) compliant
+AMD SoC temperature device.
+
+SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible
+interface that reports AMD SoC's Ttcl (normalized temperature),
+and resembles a typical 8-pin remote temperature sensor's I2C interface
+to BMC. The emulated thermal sensor can report temperatures in increments of
+0.125 degrees, ranging from 0 to 255.875.
+
+Required properties:
+- compatible: manufacturer and chip name, should be
+ "amd,sbtsi",
+
+- reg: I2C bus address of the device as specified in Section 6.3.1 of the
+SoC register reference: The SB-TSI address is normally 98h for socket 0 and
+90h for socket 1, but it could vary based on hardware address select pins.
+
+[open source SoC register reference]:
+ https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+Example:
+
+sbtsi@4c {
+ compatible = "amd,sbtsi";
+ reg = <0x4c>;
+};
--
2.26.0.292.g33ef6b2f38-goog
\
 
 \ /
  Last update: 2020-04-05 05:03    [W:0.054 / U:1.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site