lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 3/6] net: stmmac: dwmac-sunxi: Implement syscon-based clock handling
On Thu, Apr 30, 2020 at 02:56:59PM +0300, Priit Laes wrote:
> Convert the sun7i-gmac driver to use a regmap-based driver,
> instead of relying on the custom clock implementation.
>
> This allows to get rid of the last custom clock in the sun7i
> device tree making the sun7i fully CCU-compatible.
>
> Compatibility with existing devicetrees is retained.
>
> Signed-off-by: Priit Laes <plaes@plaes.org>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 130 ++++++++++++++++--
> 1 file changed, 122 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> index 0e1ca2cba3c7..206398f7a2af 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> @@ -12,8 +12,11 @@
> #include <linux/module.h>
> #include <linux/phy.h>
> #include <linux/platform_device.h>
> +#include <linux/of_device.h>
> #include <linux/of_net.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
>
> #include "stmmac_platform.h"
>
> @@ -22,11 +25,23 @@ struct sunxi_priv_data {
> int clk_enabled;
> struct clk *tx_clk;
> struct regulator *regulator;
> + struct regmap_field *regmap_field;
> +};
> +
> +/* EMAC clock register @ 0x164 in the CCU address range */
> +static const struct reg_field ccu_reg_field = {
> + .reg = 0x164,
> + .lsb = 0,
> + .msb = 31,
> };
>
> #define SUN7I_GMAC_GMII_RGMII_RATE 125000000
> #define SUN7I_GMAC_MII_RATE 25000000
>
> +#define SUN7I_A20_CLK_MASK GENMASK(2, 0)
> +#define SUN7I_A20_RGMII_CLK (BIT(2) | BIT(1))
> +#define SUN7I_A20_MII_CLK 0
> +
> static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
> {
> struct sunxi_priv_data *gmac = priv;
> @@ -38,7 +53,20 @@ static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
> return ret;
> }
>
> - /* Set GMAC interface port mode
> + if (gmac->regmap_field) {
> + if (phy_interface_mode_is_rgmii(gmac->interface)) {
> + regmap_field_update_bits(gmac->regmap_field,
> + SUN7I_A20_CLK_MASK,
> + SUN7I_A20_RGMII_CLK);
> + return clk_prepare_enable(gmac->tx_clk);
> + }

Why do you prepare and enable the clock here? ...

> + regmap_field_update_bits(gmac->regmap_field,
> + SUN7I_A20_CLK_MASK,
> + SUN7I_A20_MII_CLK);
> + return clk_enable(gmac->tx_clk);
> + }

... while you only enable it here ...

> + /* Legacy devicetree clock (allwinner,sun7i-a20-gmac-clk) support:
> *
> * The GMAC TX clock lines are configured by setting the clock
> * rate, which then uses the auto-reparenting feature of the
> @@ -62,9 +90,16 @@ static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
> {
> struct sunxi_priv_data *gmac = priv;
>
> - if (gmac->clk_enabled) {
> + if (gmac->regmap_field) {
> + regmap_field_update_bits(gmac->regmap_field,
> + SUN7I_A20_CLK_MASK, 0);
> clk_disable(gmac->tx_clk);
> - gmac->clk_enabled = 0;
> + } else {
> + /* Handle legacy devicetree clock (sun7i-a20-gmac-clk) */
> + if (gmac->clk_enabled) {
> + clk_disable(gmac->tx_clk);
> + gmac->clk_enabled = 0;
> + }
> }
> clk_unprepare(gmac->tx_clk);

.... and disable and unprepare it here?

> @@ -72,10 +107,55 @@ static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
> regulator_disable(gmac->regulator);
> }
>
> +static struct regmap *sun7i_gmac_get_syscon_from_dev(struct device_node *node)
> +{
> + struct device_node *syscon_node;
> + struct platform_device *syscon_pdev;
> + struct regmap *regmap = NULL;
> +
> + syscon_node = of_parse_phandle(node, "syscon", 0);
> + if (!syscon_node)
> + return ERR_PTR(-ENODEV);
> +
> + syscon_pdev = of_find_device_by_node(syscon_node);
> + if (!syscon_pdev) {
> + /* platform device might not be probed yet */
> + regmap = ERR_PTR(-EPROBE_DEFER);
> + goto out_put_node;
> + }
> +
> + /* If no regmap is found then the other device driver is at fault */
> + regmap = dev_get_regmap(&syscon_pdev->dev, NULL);
> + if (!regmap)
> + regmap = ERR_PTR(-EINVAL);
> +
> + platform_device_put(syscon_pdev);
> +out_put_node:
> + of_node_put(syscon_node);
> + return regmap;
> +}
> +
> static void sun7i_fix_speed(void *priv, unsigned int speed)
> {
> struct sunxi_priv_data *gmac = priv;
>
> + if (gmac->regmap_field) {
> + clk_disable(gmac->tx_clk);
> + clk_unprepare(gmac->tx_clk);
> + if (speed == 1000)
> + regmap_field_update_bits(gmac->regmap_field,
> + SUN7I_A20_CLK_MASK,
> + SUN7I_A20_RGMII_CLK);
> + else
> + regmap_field_update_bits(gmac->regmap_field,
> + SUN7I_A20_CLK_MASK,
> + SUN7I_A20_MII_CLK);
> + clk_prepare_enable(gmac->tx_clk);


If were going to use clk_prepare_enable, we might as well use
clk_disable_unprepare

> + return;
> + }
> +
> + /* Handle legacy devicetree clock (sun7i-a20-gmac-clk) */

That doesn't say much, you should rather explain what the situation is exactly.

> +
> /* only GMII mode requires us to reconfigure the clock lines */
> if (gmac->interface != PHY_INTERFACE_MODE_GMII)
> return;
> @@ -102,6 +182,8 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
> struct stmmac_resources stmmac_res;
> struct sunxi_priv_data *gmac;
> struct device *dev = &pdev->dev;
> + struct device_node *syscon_node;
> + struct regmap *regmap = NULL;
> int ret;
>
> ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> @@ -124,11 +206,43 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
> goto err_remove_config_dt;
> }
>
> - gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
> - if (IS_ERR(gmac->tx_clk)) {
> - dev_err(dev, "could not get tx clock\n");
> - ret = PTR_ERR(gmac->tx_clk);
> - goto err_remove_config_dt;
> + /* Attempt to fetch syscon node... */
> + syscon_node = of_parse_phandle(dev->of_node, "syscon", 0);
> + if (syscon_node) {
> + gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
> + if (IS_ERR(gmac->tx_clk)) {
> + dev_err(dev, "Could not get TX clock\n");
> + ret = PTR_ERR(gmac->tx_clk);
> + goto err_remove_config_dt;
> + }

I'm not quite sure why you added this clock lookup here? Wasn't it here already?

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-04-30 16:58    [W:0.057 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site