lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] soc: imx: Add power domain driver support for i.mx8m family
On Mon, Apr 27, 2020 at 10:37 AM Jacky Bai <ping.bai@nxp.com> wrote:
>
> > -----Original Message-----
> > From: Lucas Stach <l.stach@pengutronix.de>
> > Sent: Monday, April 27, 2020 11:11 PM
> > To: Abel Vesa <abel.vesa@nxp.com>; Jacky Bai <ping.bai@nxp.com>; Shawn
> > Guo <shawnguo@kernel.org>; Sascha Hauer <kernel@pengutronix.de>; Liam
> > Girdwood <lgirdwood@gmail.com>; Mark Brown <broonie@kernel.org>
> > Cc: Aisheng Dong <aisheng.dong@nxp.com>; dl-linux-imx
> > <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org; Linux Kernel
> > Mailing List <linux-kernel@vger.kernel.org>
> > Subject: Re: [PATCH] soc: imx: Add power domain driver support for i.mx8m
> > family
> >
> > Am Montag, den 27.04.2020, 17:58 +0300 schrieb Abel Vesa:
> > > From: Jacky Bai <ping.bai@nxp.com>
> > >
> > > The i.MX8M family is a set of NXP product focus on delivering the
> > > latest and greatest video and audio experience combining
> > > state-of-the-art media-specific features with high-performance
> > > processing while optimized for lowest power consumption.
> > >
> > > i.MX8MQ, i.MX8MM, i.MX8MN, even the furture i.MX8MP are all belong to
> > > this family. A GPC module is used to manage all the PU power domain
> > > on/off. But the situation is that the number of power domains & the
> > > power up sequence has significate difference on those SoCs. Even on
> > > the same SoC. The power up sequence still has big difference. It makes
> > > us hard to reuse the GPCv2 driver to cover the whole i.MX8M family.
> > > Each time a new SoC is supported in the mainline kernel, we need to
> > > modify the GPCv2 driver to support it. We need to add or modify
> > > hundred lines of code in worst case.
> > > It is a bad practice for the driver maintainability.
> > >
> > > This driver add a more generic power domain driver that the actual
> > > power on/off is done by TF-A code. the abstraction give us the
> > > possibility that using one driver to cover the whole i.MX8M family in
> > > kernel side.
> > >
> >
> > Again: what does this driver bring to the table, other than moving a fraction of
> > the power domain functionality into the firmware?
> >
> > The discussions on the last submissions of this driver already established that
> > we can't move all functionality for the power domains into the firmware, as
> > controlling regulators is probably not easy to do from this context. Also the
> > TF-A side implementation of this driver is "interesting" IMHO, it does stuff like
> > accessing the clock controller registers without any locking or other means of
> > mutual exclusion with the Linux kernel clock controller driver.
> >
>
> The clock handling is in kernel side through CCF, not in ATF. See the patch below.
>
> > Why can't we just extend the existing GPCv2 driver with support for the other
> > i.MX8M family members?
> >
>
> The reason that why I don’t like to extend the GPCv2 is that when doing domain on/off,
> We need to access some special control register in each domain & do some special flow,
> These control register(mediamix block control, vpumix block control) is not in GPC
> module's address range. No benefit to reuse the GPCv2. Only bring complexity to the
> GPCv2 driver each time a new SoC is added.
>
> Yes, the i.MX8M power domain support has been pending for a while. ARM guys rejected this patchset
> because they suggest us to use SCMI rather than SiP. But SCMI is only partial suitable for our
> case.

I have been anxiously waiting for this. If I want to test this, what
ATF do we need to use? I know for some of the DDRC stuff, we couldn't
use upstream ATF or U-Boot, so I had to use a custom version from
NXP's repo. Ideally, it would be nice to have everything play nicely
together so we don't have to depend on external repos like the NXP
repo on Code Auroroa. I am not complaining, but when I attempted to
push U-Boot, I mentioned that I needed a specific branch of ATF. I
wanted that version of U-Boot for DDRC in the kernel, and now I'd like
to make sure I understand the requirements of this, so we can easily
build and test your patch. You mention that that ARM rejected the
patch set, so I just want to make sure I know what I need to do.

thanks,

adam


>
> BR
> Jacky Bai
> > Regards,
> > Lucas
> >
> > > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> > > ---
> > > drivers/soc/imx/Kconfig | 6 +
> > > drivers/soc/imx/Makefile | 1 +
> > > drivers/soc/imx/imx8m_pm_domains.c | 224
> > +++++++++++++++++++++++++++++++++++++
> > > include/soc/imx/imx_sip.h | 12 ++
> > > 4 files changed, 243 insertions(+)
> > > create mode 100644 drivers/soc/imx/imx8m_pm_domains.c
> > > create mode 100644 include/soc/imx/imx_sip.h
> > >
> > > diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index
> > > d515d2c..7837199 100644
> > > --- a/drivers/soc/imx/Kconfig
> > > +++ b/drivers/soc/imx/Kconfig
> > > @@ -27,4 +27,10 @@ config SOC_IMX8M
> > > support, it will provide the SoC info like SoC family,
> > > ID and revision etc.
> > >
> > > +config IMX8M_PM_DOMAINS
> > > + bool "i.MX8M PM domains"
> > > + depends on ARCH_MXC || (COMPILE_TEST && OF)
> > > + depends on PM
> > > + select PM_GENERIC_DOMAINS
> > > +
> > > endmenu
> > > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index
> > > 103e2c9..a22e24b 100644
> > > --- a/drivers/soc/imx/Makefile
> > > +++ b/drivers/soc/imx/Makefile
> > > @@ -3,3 +3,4 @@ obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> > > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > > obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> > > obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
> > > +obj-$(CONFIG_IMX8M_PM_DOMAINS) += imx8m_pm_domains.o
> > > diff --git a/drivers/soc/imx/imx8m_pm_domains.c
> > > b/drivers/soc/imx/imx8m_pm_domains.c
> > > new file mode 100644
> > > index 00000000..ce06a05
> > > --- /dev/null
> > > +++ b/drivers/soc/imx/imx8m_pm_domains.c
> > > @@ -0,0 +1,224 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright 2019 NXP.
> > > + */
> > > +
> > > +#include <linux/arm-smccc.h>
> > > +#include <linux/clk.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/io.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/pm_domain.h>
> > > +#include <linux/regulator/consumer.h>
> > > +
> > > +#include <soc/imx/imx_sip.h>
> > > +
> > > +#define MAX_CLK_NUM 6
> > > +#define to_imx8m_pm_domain(_genpd) container_of(_genpd, struct
> > > +imx8m_pm_domain, pd)
> > > +
> > > +
> > > +struct imx8m_pm_domain {
> > > + struct device *dev;
> > > + struct generic_pm_domain pd;
> > > + u32 domain_index;
> > > + struct clk *clk[MAX_CLK_NUM];
> > > + unsigned int num_clks;
> > > + struct regulator *reg;
> > > +};
> > > +
> > > +enum imx8m_pm_domain_state {
> > > + PD_STATE_OFF,
> > > + PD_STATE_ON,
> > > +};
> > > +
> > > +static DEFINE_MUTEX(gpc_pd_mutex);
> > > +
> > > +static int imx8m_pd_power_on(struct generic_pm_domain *genpd) {
> > > + struct imx8m_pm_domain *domain = to_imx8m_pm_domain(genpd);
> > > + struct arm_smccc_res res;
> > > + int index, ret = 0;
> > > +
> > > + /* power on the external supply */
> > > + if (!IS_ERR(domain->reg)) {
> > > + ret = regulator_enable(domain->reg);
> > > + if (ret) {
> > > + dev_warn(domain->dev, "failed to power up the reg%d\n", ret);
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + /* enable the necessary clks needed by the power domain */
> > > + if (domain->num_clks) {
> > > + for (index = 0; index < domain->num_clks; index++)
> > > + clk_prepare_enable(domain->clk[index]);
> > > + }
> > > +
> > > + mutex_lock(&gpc_pd_mutex);
> > > + arm_smccc_smc(IMX_SIP_GPC, IMX_SIP_CONFIG_GPC_PM_DOMAIN,
> > domain->domain_index,
> > > + PD_STATE_ON, 0, 0, 0, 0, &res);
> > > + mutex_unlock(&gpc_pd_mutex);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx8m_pd_power_off(struct generic_pm_domain *genpd) {
> > > + struct imx8m_pm_domain *domain = to_imx8m_pm_domain(genpd);
> > > + struct arm_smccc_res res;
> > > + int index, ret = 0;
> > > +
> > > + mutex_lock(&gpc_pd_mutex);
> > > + arm_smccc_smc(IMX_SIP_GPC, IMX_SIP_CONFIG_GPC_PM_DOMAIN,
> > domain->domain_index,
> > > + PD_STATE_OFF, 0, 0, 0, 0, &res);
> > > + mutex_unlock(&gpc_pd_mutex);
> > > +
> > > + /* power off the external supply */
> > > + if (!IS_ERR(domain->reg)) {
> > > + ret = regulator_disable(domain->reg);
> > > + if (ret) {
> > > + dev_warn(domain->dev, "failed to power off the reg%d\n",
> > ret);
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + /* disable clks when power domain is off */
> > > + if (domain->num_clks) {
> > > + for (index = 0; index < domain->num_clks; index++)
> > > + clk_disable_unprepare(domain->clk[index]);
> > > + }
> > > +
> > > + return ret;
> > > +};
> > > +
> > > +static int imx8m_pd_get_clocks(struct imx8m_pm_domain *domain) {
> > > + int i, ret;
> > > +
> > > + for (i = 0; ; i++) {
> > > + struct clk *clk = of_clk_get(domain->dev->of_node, i);
> > > + if (IS_ERR(clk))
> > > + break;
> > > + if (i >= MAX_CLK_NUM) {
> > > + dev_err(domain->dev, "more than %d clocks\n",
> > > + MAX_CLK_NUM);
> > > + ret = -EINVAL;
> > > + goto clk_err;
> > > + }
> > > + domain->clk[i] = clk;
> > > + }
> > > + domain->num_clks = i;
> > > +
> > > + return 0;
> > > +
> > > +clk_err:
> > > + while (i--)
> > > + clk_put(domain->clk[i]);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static void imx8m_pd_put_clocks(struct imx8m_pm_domain *domain) {
> > > + int i;
> > > +
> > > + for (i = domain->num_clks - 1; i >= 0; i--)
> > > + clk_put(domain->clk[i]);
> > > +}
> > > +
> > > +static const struct of_device_id imx8m_pm_domain_ids[] = {
> > > + {.compatible = "fsl,imx8m-pm-domain"},
> > > + {},
> > > +};
> > > +
> > > +static int imx8m_pm_domain_probe(struct platform_device *pdev) {
> > > + struct device *dev = &pdev->dev;
> > > + struct device_node *np = dev->of_node;
> > > + struct imx8m_pm_domain *domain;
> > > + struct of_phandle_args parent, child;
> > > + int ret;
> > > +
> > > + domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
> > > + if (!domain)
> > > + return -ENOMEM;
> > > +
> > > + child.np = np;
> > > + domain->dev = dev;
> > > +
> > > + ret = of_property_read_string(np, "domain-name", &domain->pd.name);
> > > + if (ret) {
> > > + dev_err(dev, "failed to get the domain name\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + ret = of_property_read_u32(np, "domain-index",
> > &domain->domain_index);
> > > + if (ret) {
> > > + dev_err(dev, "failed to get the domain index\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + domain->reg = devm_regulator_get_optional(dev, "power");
> > > + if (IS_ERR(domain->reg)) {
> > > + if (PTR_ERR(domain->reg) != -ENODEV) {
> > > + if (PTR_ERR(domain->reg) != -EPROBE_DEFER)
> > > + dev_err(dev, "failed to get domain's regulator\n");
> > > + return PTR_ERR(domain->reg);
> > > + }
> > > + }
> > > +
> > > + ret = imx8m_pd_get_clocks(domain);
> > > + if (ret) {
> > > + if (ret != -EPROBE_DEFER)
> > > + dev_err(dev, "failed to get domain's clocks\n");
> > > + return ret;
> > > + }
> > > +
> > > + domain->pd.power_off = imx8m_pd_power_off;
> > > + domain->pd.power_on = imx8m_pd_power_on;
> > > +
> > > + pm_genpd_init(&domain->pd, NULL, true);
> > > +
> > > + ret = of_genpd_add_provider_simple(np, &domain->pd);
> > > + if (ret) {
> > > + dev_err(dev, "failed to add the domain provider\n");
> > > + pm_genpd_remove(&domain->pd);
> > > + imx8m_pd_put_clocks(domain);
> > > + return ret;
> > > + }
> > > +
> > > + /* add it as subdomain if necessary */
> > > + if (!of_parse_phandle_with_args(np, "parent-domains",
> > > + "#power-domain-cells", 0, &parent)) {
> > > + ret = of_genpd_add_subdomain(&parent, &child);
> > > + of_node_put(parent.np);
> > > +
> > > + if (ret < 0) {
> > > + dev_dbg(dev, "failed to add the subdomain: %s: %d",
> > > + domain->pd.name, ret);
> > > + of_genpd_del_provider(np);
> > > + pm_genpd_remove(&domain->pd);
> > > + imx8m_pd_put_clocks(domain);
> > > + return driver_deferred_probe_check_state(dev);
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct platform_driver imx8m_pm_domain_driver = {
> > > + .driver = {
> > > + .name = "imx8m_pm_domain",
> > > + .owner = THIS_MODULE,
> > > + .of_match_table = imx8m_pm_domain_ids,
> > > + },
> > > + .probe = imx8m_pm_domain_probe,
> > > +};
> > > +module_platform_driver(imx8m_pm_domain_driver);
> > > +
> > > +MODULE_AUTHOR("NXP");
> > > +MODULE_DESCRIPTION("NXP i.MX8M power domain driver");
> > > +MODULE_LICENSE("GPL v2");
> > > diff --git a/include/soc/imx/imx_sip.h b/include/soc/imx/imx_sip.h new
> > > file mode 100644 index 00000000..6b96b33
> > > --- /dev/null
> > > +++ b/include/soc/imx/imx_sip.h
> > > @@ -0,0 +1,12 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * Copyright 2019 NXP
> > > + */
> > > +
> > > +#ifndef __IMX_SIP_H__
> > > +#define __IMX_SIP_H__
> > > +
> > > +#define IMX_SIP_GPC 0xC2000000
> > > +#define IMX_SIP_CONFIG_GPC_PM_DOMAIN 0x03
> > > +
> > > +#endif /* __IMX_SIP_H__ */
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2020-04-30 14:58    [W:0.835 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site