lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/12] dt-bindings: PCI: aardvark: Describe new properties
Date
From: Marek Behún <marek.behun@nic.cz>

Document the possibility to reference a PHY and reset-gpios and to set
max-link-speed property.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
Documentation/devicetree/bindings/pci/aardvark-pci.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..2b8ca920a7fa 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -19,6 +19,9 @@ contain the following properties:
- interrupt-map-mask and interrupt-map: standard PCI properties to
define the mapping of the PCIe interface to interrupt numbers.
- bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt

In addition, the Device Tree describing an Aardvark PCIe controller
must include a sub-node that describes the legacy interrupt controller
@@ -48,6 +51,7 @@ Example:
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
--
2.20.1
\
 
 \ /
  Last update: 2020-04-30 10:07    [W:0.147 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site