lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 08/15] usb: ehci: avoid gcc-10 zero-length-bounds warning
On Thu, 30 Apr 2020, Arnd Bergmann wrote:

> Building ehci drivers with gcc-10 results in a number of warnings like
> when an zero-length array is accessed:
>
> drivers/usb/host/ehci-hub.c: In function 'ehci_bus_suspend':
> drivers/usb/host/ehci-hub.c:320:30: error: array subscript 14 is outside the bounds of an interior zero-length array 'u32[0]' {aka 'unsigned int[0]'} [-Werror=zero-length-bounds]
> 320 | u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
> | ^~~~~~~~~~~~~~~~~~~~~~~~~
> In file included from drivers/usb/host/ehci.h:273,
> from drivers/usb/host/ehci-hcd.c:96:
> include/linux/usb/ehci_def.h:186:7: note: while referencing 'hostpc'
> 186 | u32 hostpc[0]; /* HOSTPC extension */
> | ^~~~~~
> In file included from drivers/usb/host/ehci-hcd.c:305:
> drivers/usb/host/ehci-hub.c: In function 'ehci_hub_control':
> drivers/usb/host/ehci-hub.c:892:15: error: array subscript 256 is outside the bounds of an interior zero-length array 'u32[0]' {aka 'unsigned int[0]'} [-Werror=zero-length-bounds]
> 892 | hostpc_reg = &ehci->regs->hostpc[temp];
> | ^~~~~~~~~~~~~~~~~~~~~~~~~
> In file included from drivers/usb/host/ehci.h:273,
> from drivers/usb/host/ehci-hcd.c:96:
> include/linux/usb/ehci_def.h:186:7: note: while referencing 'hostpc'
> 186 | u32 hostpc[0]; /* HOSTPC extension */
> | ^~~~~~
>
> All these fields are colocated with reserved fields that I guess
> refer to the correct field length.

No, they don't.

> Change the two struct definition to use an unnamed union to define
> both of these fields at the same location as the corresponding
> reserved fields.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> include/linux/usb/ehci_def.h | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
> index 78e006355557..8777d8e56ef2 100644
> --- a/include/linux/usb/ehci_def.h
> +++ b/include/linux/usb/ehci_def.h
> @@ -127,7 +127,8 @@ struct ehci_regs {
> #define FLAG_CF (1<<0) /* true: we'll support "high speed" */
>
> /* PORTSC: offset 0x44 */
> - u32 port_status[0]; /* up to N_PORTS */
> + union {
> + u32 port_status[9]; /* up to N_PORTS */

This array can have up to 15 elements, meaning that it can extend out
to offset 0x80.

> /* EHCI 1.1 addendum */
> #define PORTSC_SUSPEND_STS_ACK 0
> #define PORTSC_SUSPEND_STS_NYET 1
> @@ -165,7 +166,8 @@ struct ehci_regs {
> #define PORT_CONNECT (1<<0) /* device connected */
> #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
>
> - u32 reserved3[9];
> + u32 reserved3[9];
> + };
>
> /* USBMODE: offset 0x68 */
> u32 usbmode; /* USB Device mode */

As you see, this next field actually lies inside the preceding array.
It's not a real conflict; any hardware which supports the usbmode field
uses only the first element of the port_status array.

I don't know how you want to handle this. Doing

#define usbmode port_status[9]

doesn't seem like a very good approach, but I can't think of anything
better at the moment. Maybe just set the array size to 9, as you did,
but with a comment explaining what's really going on.

> @@ -181,11 +183,13 @@ struct ehci_regs {
> * PORTSCx
> */
> /* HOSTPC: offset 0x84 */
> - u32 hostpc[0]; /* HOSTPC extension */
> + union {
> + u32 hostpc[17]; /* HOSTPC extension */

Likewise, this array can have up to 15 elements. In fact, it's the
same size as the port_status array.

> #define HOSTPC_PHCD (1<<22) /* Phy clock disable */
> #define HOSTPC_PSPD (3<<25) /* Port speed detection */
>
> - u32 reserved5[17];
> + u32 reserved5[17];
> + };
>
> /* USBMODE_EX: offset 0xc8 */
> u32 usbmode_ex; /* USB Device mode extension */

Alan Stern

\
 
 \ /
  Last update: 2020-05-01 04:43    [W:1.011 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site