lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] soc: qcom: ipcc: Add support for IPCC controller
On 30-04-20, 12:00, Manivannan Sadhasivam wrote:

> +#define IPCC_SIGNAL_ID_MASK GENMASK(15, 0)
> +#define IPCC_CLIENT_ID_MASK GENMASK(31, 16)
> +#define IPCC_CLIENT_ID_SHIFT 16
> +
> +#define IPCC_NO_PENDING_IRQ 0xffffffff

Why not GENMASK(31, 0)

> +static struct qcom_ipcc_proto_data *ipcc_proto_data;

why do we need a global which is used only once.

> +static void qcom_ipcc_mask_irq(struct irq_data *irqd)
> +{
> + struct qcom_ipcc_proto_data *proto_data;
> + irq_hw_number_t hwirq = irqd_to_hwirq(irqd);
> + u16 sender_client_id = qcom_ipcc_get_client_id(hwirq);
> + u16 sender_signal_id = qcom_ipcc_get_signal_id(hwirq);

last three are used for debug log, fn can be much simpler if we get rid
of noise.. Do we really need this to be production :)

> +
> + proto_data = irq_data_get_irq_chip_data(irqd);
> +
> + dev_dbg(proto_data->dev,
> + "Disabling interrupts for: client_id: %u; signal_id: %u\n",
> + sender_client_id, sender_signal_id);
> +
> + writel(hwirq, proto_data->base + IPCC_REG_RECV_SIGNAL_DISABLE);
> +}
> +
> +static void qcom_ipcc_unmask_irq(struct irq_data *irqd)
> +{
> + struct qcom_ipcc_proto_data *proto_data;
> + irq_hw_number_t hwirq = irqd_to_hwirq(irqd);
> + u16 sender_client_id = qcom_ipcc_get_client_id(hwirq);
> + u16 sender_signal_id = qcom_ipcc_get_signal_id(hwirq);

here as well

> +static int qcom_ipcc_domain_xlate(struct irq_domain *d,
> + struct device_node *node, const u32 *intspec,
> + unsigned int intsize,
> + unsigned long *out_hwirq,
> + unsigned int *out_type)

pls align these to match open parenthesis

> +static int qcom_ipcc_setup_mbox(struct qcom_ipcc_proto_data *proto_data,
> + struct device_node *controller_dn)
> +{
> + struct mbox_controller *mbox;
> + struct device_node *client_dn;
> + struct device *dev = proto_data->dev;
> + struct of_phandle_args curr_ph;
> + int i, j, ret;
> + int num_chans = 0;
> +
> + /*
> + * Find out the number of clients interested in this mailbox
> + * and create channels accordingly.
> + */
> + for_each_node_with_property(client_dn, "mboxes") {
> + if (!of_device_is_available(client_dn))
> + continue;
> + i = of_count_phandle_with_args(client_dn,
> + "mboxes", "#mbox-cells");
> + for (j = 0; j < i; j++) {
> + ret = of_parse_phandle_with_args(client_dn, "mboxes",
> + "#mbox-cells", j,
> + &curr_ph);

this sounds like something DT should do, not drivers :)

> +static int qcom_ipcc_probe(struct platform_device *pdev)
> +{
> + struct qcom_ipcc_proto_data *proto_data;
> + int ret;
> +
> + proto_data = devm_kzalloc(&pdev->dev, sizeof(*proto_data), GFP_KERNEL);
> + if (!proto_data)
> + return -ENOMEM;
> +
> + ipcc_proto_data = proto_data;
> + proto_data->dev = &pdev->dev;
> +
> + proto_data->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(proto_data->base)) {
> + dev_err(&pdev->dev, "Failed to ioremap the ipcc base addr\n");
> + return PTR_ERR(proto_data->base);
> + }
> +
> + proto_data->irq = platform_get_irq(pdev, 0);
> + if (proto_data->irq < 0) {
> + dev_err(&pdev->dev, "Failed to get the IRQ\n");
> + return proto_data->irq;
> + }
> +
> + /* Perform a SW reset on this client's protocol state */
> + writel(0x1, proto_data->base + IPCC_REG_CLIENT_CLEAR);
> +
> + proto_data->irq_domain = irq_domain_add_tree(pdev->dev.of_node,
> + &qcom_ipcc_irq_ops,
> + proto_data);
> + if (!proto_data->irq_domain) {
> + dev_err(&pdev->dev, "Failed to add irq_domain\n");
> + return -ENOMEM;
> + }
> +
> + ret = qcom_ipcc_setup_mbox(proto_data, pdev->dev.of_node);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to create mailbox\n");
> + goto err_mbox;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, proto_data->irq, qcom_ipcc_irq_fn,
> + IRQF_TRIGGER_HIGH, "ipcc", proto_data);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to register the irq: %d\n", ret);

Should the qcom_ipcc_setup_mbox() not be unroller here?

> + goto err_mbox;
> + }
> +
> + enable_irq_wake(proto_data->irq);
> + platform_set_drvdata(pdev, proto_data);
> +
> + return 0;
> +
> +err_mbox:
> + irq_domain_remove(proto_data->irq_domain);
> +
> + return ret;
> +}
> +
> +static int qcom_ipcc_remove(struct platform_device *pdev)
> +{
> + struct qcom_ipcc_proto_data *proto_data = platform_get_drvdata(pdev);
> +
> + disable_irq_wake(proto_data->irq);
> + irq_domain_remove(proto_data->irq_domain);

So you are calling this when your isr is active, we have possibility of
race here. This function come with a warning:
"The caller must ensure that all mappings within the domain have been disposed"

Has that been done?

--
~Vinod

\
 
 \ /
  Last update: 2020-04-30 09:25    [W:0.094 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site