lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: bug: Kbuild seems to require "make prepare-objtool" in order to use (some) new config vars
Em Thu, 30 Apr 2020 22:51:48 +0900
Masahiro Yamada <masahiroy@kernel.org> escreveu:

> Hi Mauro,
>
>
> On Thu, Apr 30, 2020 at 8:17 PM Mauro Carvalho Chehab
> <mchehab+huawei@kernel.org> wrote:
> >
> > Hi Masahiro,
> >
> > Not sure if this was already reported (or eventually fixed) upstream.
> >
> > While doing a Kconfig reorg on media, I noticed a few weird things,
> > requiring me to call, on a few situations, "make modules_prepare"
> > manually after some changes.
> >
> > I'm now working on a patchset to yet to be merged upstream aiming to
> > resurrect a driver from staging. It is currently on this tree
> > (with is based at the media development tree, on the top of 5.7-rc1):
> >
> > https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_v2
> >
> > There, I was able to identify a misbehavior that it is probably
> > what forced me to need calling "make modules_prepare".
> >
> > The atomisp driver is on a very bad shape. Among its problems, it has a
> > set of header definitions that should be different for two different
> > variants of the supported devices. In order to be able to compile for
> > either one of the variants, I added a new config var:
> > CONFIG_VIDEO_ATOMISP_ISP2401.
> >
> > The problem is that calling just
> >
> > ./scripts/config -e CONFIG_VIDEO_ATOMISP_ISP2401
> >
> > or
> > ./scripts/config -d CONFIG_VIDEO_ATOMISP_ISP2401
>
>
> scripts/config does not take the dependency into consideration
> at all.
>
> You need to enable/disable other options that it depends on.

Yes, I know. on my tests, I did a "make allyesconfig" before
the patch whose added this dependency. So, the only dependency
left to be enabled or disabled was this one.

The problem I'm pointing is not really do a select recursion
(that would be a really cool feature, but I know it is not
trivial), but, instead, that, despite the config var was
there, when I tried to build it with:

make clean; make M=drivers/staging/media/atomisp

It didn't do the right thing. Instead, it used ISP2401=y
on make clean and ISP2401=n at the drivers build.

So, in order to test if patches won't break building,
depending on the value of this var, I'm currently doing:

cls;./scripts/config -d CONFIG_VIDEO_ATOMISP_ISP2401 && make prepare-objtool && make clean && make M=drivers/staging/media/atomisp && ./scripts/config -e CONFIG_VIDEO_ATOMISP_ISP2401 && make prepare-objtool && make clean && make M=drivers/staging/media/atomisp

(note the alien "make prepare-objtool" in the middle)


> ./scripts/config -e STAGING -e STAGING_MEDIA -e MEDIA_SUPPORT -e
> MEDIA_CONTROLLER -e INTEL_ATOMISP -e VIDEOBUF_VMALLOC -e VIDEO_ATOMISP
> -d MEDIA_SUPPORT_FILTER -e VIDEO_DEV -e VIDEO_V4L2 -e
> VIDEO_ATOMISP_ISP2401
>
> allows me to enable VIDEO_ATOMISP_ISP2401.
>
>
> It is painful to debug such complicated dependency graph, though.

Yeah, dependencies at the media subsystem are usually quite complex.

> >
> > is not enough anymore for the build to actually use the new config value.
> >
> > It just keeps silently using the old config value.
> >
> > I double-checked it by adding this macro at the Makefile:
> >
> > $(info ************ ISP2401: $(CONFIG_VIDEO_ATOMISP_ISP2401) ************)
> >
> > The Makefile doesn't see the change, except if I explicitly call
> > "make modules_prepare" or "make prepare-objtool".
> >
> > Even calling "make oldconfig" doesn't make it use the new CONFIG_*
>
>
> I do not know.
>
> I cannot look into it without detailed steps to reproduce it.

I'm applying the enclosed patch to this branch:

https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_v2

and running this:

$ make allyesconfig 2>/dev/null >/dev/null; echo "disable";./scripts/config -d CONFIG_VIDEO_ATOMISP_ISP2401 && make M=drivers/staging/media/atomisp && ./scripts/config -e CONFIG_VIDEO_ATOMISP_ISP2401 && echo "enable" && make clean && make M=drivers/staging/media/atomisp
disable

WARNING: Symbol version dump ./Module.symvers
is missing; modules will have no dependencies and modversions.

************ ISP2401: y ************
AR drivers/staging/media/atomisp/built-in.a
************ ISP2401: y ************
MODPOST 0 modules
enable
************ ISP2401: ************

WARNING: Symbol version dump ./Module.symvers
is missing; modules will have no dependencies and modversions.

************ ISP2401: y ************
AR drivers/staging/media/atomisp/built-in.a
************ ISP2401: y ************
MODPOST 0 modules

PS.: the same occurs if I use "make allmodconfig".

Thanks,
Mauro


diff --git a/drivers/staging/media/atomisp/Makefile b/drivers/staging/media/atomisp/Makefile
index b0a396cb6bb3..f796cfce2f72 100644
--- a/drivers/staging/media/atomisp/Makefile
+++ b/drivers/staging/media/atomisp/Makefile
@@ -1,9 +1,11 @@
#
# Makefile for camera drivers.
#
-obj-$(CONFIG_INTEL_ATOMISP) += i2c/
-obj-$(CONFIG_INTEL_ATOMISP) += platform/
-obj-$(CONFIG_VIDEO_ATOMISP) += atomisp.o
+
+# HACK: disable all builds
+#obj-$(CONFIG_INTEL_ATOMISP) += i2c/
+#obj-$(CONFIG_INTEL_ATOMISP) += platform/
+#obj-$(CONFIG_VIDEO_ATOMISP) += atomisp.o

atomisp = $(srctree)/drivers/staging/media/atomisp/

\
 
 \ /
  Last update: 2020-04-30 18:51    [W:0.111 / U:1.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site