lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/1] net/mlx5: Call pci_disable_sriov() on remove
Date
On Thu, 2020-04-30 at 14:03 +0200, Niklas Schnelle wrote:
> as described in Documentation/PCI/pci-iov-howto.rst a driver with SR-
> IOV
> support should call pci_disable_sriov() in the remove handler.

Hi Niklas,

looking at the documentation, it doesn't say "should" it just gives the
code as example.

> Otherwise removing a PF (e.g. via pci_stop_and_remove_bus_device())
> with
> attached VFs does not properly shut the VFs down before shutting down
> the PF. This leads to the VF drivers handling defunct devices and
> accompanying error messages.
>

Which should be the admin responsibility .. if the admin want to do
this, then let it be.. why block him ?

our mlx5 driver in the vf handles this gracefully and once pf
driver/device is back online the vf driver quickly recovers.

> In the current code pci_disable_sriov() is already called in
> mlx5_sriov_disable() but not in mlx5_sriov_detach() which is called
> from
> the remove handler. Fix this by moving the pci_disable_sriov() call
> into
> mlx5_device_disable_sriov() which is called by both.
>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
> drivers/net/ethernet/mellanox/mlx5/core/sriov.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
> b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
> index 3094d20297a9..2401961c9f5b 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
> @@ -114,6 +114,8 @@ mlx5_device_disable_sriov(struct mlx5_core_dev
> *dev, int num_vfs, bool clear_vf)
> int err;
> int vf;
>
> + pci_disable_sriov(dev->pdev);
> +
> for (vf = num_vfs - 1; vf >= 0; vf--) {
> if (!sriov->vfs_ctx[vf].enabled)
> continue;
> @@ -156,7 +158,6 @@ static void mlx5_sriov_disable(struct pci_dev
> *pdev)
> struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
> int num_vfs = pci_num_vf(dev->pdev);
>
> - pci_disable_sriov(pdev);

this patch is no good as it breaks code symmetry.. and could lead to
many new issues.


> mlx5_device_disable_sriov(dev, num_vfs, true);
> }
>

\
 
 \ /
  Last update: 2020-04-30 17:58    [W:0.058 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site