lkml.org 
[lkml]   [2020]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/5] OPP: refactor dev_pm_opp_of_register_em() and update related drivers
From
Date
On 18/03/2020 12:45, Lukasz Luba wrote:
> The Energy Model framework supports both: CPUs and devfreq devices. Drop
> the CPU specific interface with cpumask and add struct device. Add also a
> return value. This new interface provides easy way to create a simple
> Energy Model, which then might be used in i.e. thermal subsystem.

This patch contains too many different changes.

There are fixes and traces added in addition to a function prototype change.

Please provide patches separated by logical changes.

If the cpumask is extracted in the underlying function
em_register_perf_domain() as suggested in the previous patch 1/5,
dev_pm_opp_of_register_em() can be struct device centric only.

> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
> ---
> drivers/cpufreq/cpufreq-dt.c | 2 +-
> drivers/cpufreq/imx6q-cpufreq.c | 2 +-
> drivers/cpufreq/mediatek-cpufreq.c | 2 +-
> drivers/cpufreq/omap-cpufreq.c | 2 +-
> drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
> drivers/cpufreq/scpi-cpufreq.c | 2 +-
> drivers/cpufreq/vexpress-spc-cpufreq.c | 2 +-
> drivers/opp/of.c | 71 ++++++++++++++++----------
> include/linux/pm_opp.h | 15 +++++-
> 9 files changed, 65 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index 26fe8dfb9ce6..f9f03fd49b83 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c
> @@ -275,7 +275,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
> policy->cpuinfo.transition_latency = transition_latency;
> policy->dvfs_possible_from_any_cpu = true;
>
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>
> return 0;
>
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 285b8e9aa185..9764abf17ce3 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -193,7 +193,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
> policy->clk = clks[ARM].clk;
> cpufreq_generic_init(policy, freq_table, transition_latency);
> policy->suspend_freq = max_freq;
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>
> return 0;
> }
> diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
> index 0c98dd08273d..7d1212c9b7c8 100644
> --- a/drivers/cpufreq/mediatek-cpufreq.c
> +++ b/drivers/cpufreq/mediatek-cpufreq.c
> @@ -448,7 +448,7 @@ static int mtk_cpufreq_init(struct cpufreq_policy *policy)
> policy->driver_data = info;
> policy->clk = info->cpu_clk;
>
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(info->cpu_dev, policy->cpus);
>
> return 0;
> }
> diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
> index 8d14b42a8c6f..3694bb030df3 100644
> --- a/drivers/cpufreq/omap-cpufreq.c
> +++ b/drivers/cpufreq/omap-cpufreq.c
> @@ -131,7 +131,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
>
> /* FIXME: what's the actual transition time? */
> cpufreq_generic_init(policy, freq_table, 300 * 1000);
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(mpu_dev, policy->cpus);
>
> return 0;
> }
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index fc92a8842e25..0a04b6f03b9a 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -238,7 +238,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> goto error;
> }
>
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>
> policy->fast_switch_possible = true;
>
> diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
> index 20d1f85d5f5a..b0f5388b8854 100644
> --- a/drivers/cpufreq/scpi-cpufreq.c
> +++ b/drivers/cpufreq/scpi-cpufreq.c
> @@ -167,7 +167,7 @@ static int scpi_cpufreq_init(struct cpufreq_policy *policy)
>
> policy->fast_switch_possible = false;
>
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>
> return 0;
>
> diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
> index 83c85d3d67e3..4e8b1dee7c9a 100644
> --- a/drivers/cpufreq/vexpress-spc-cpufreq.c
> +++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
> @@ -450,7 +450,7 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
> policy->freq_table = freq_table[cur_cluster];
> policy->cpuinfo.transition_latency = 1000000; /* 1 ms */
>
> - dev_pm_opp_of_register_em(policy->cpus);
> + dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>
> if (is_bL_switching_enabled())
> per_cpu(cpu_last_req_freq, policy->cpu) =
> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> index 0efd6cf6d023..f94d095113e7 100644
> --- a/drivers/opp/of.c
> +++ b/drivers/opp/of.c
> @@ -1036,18 +1036,18 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_of_node);
>
> /*
> * Callback function provided to the Energy Model framework upon registration.
> - * This computes the power estimated by @CPU at @kHz if it is the frequency
> + * This computes the power estimated by @dev at @kHz if it is the frequency
> * of an existing OPP, or at the frequency of the first OPP above @kHz otherwise
> * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled
> * frequency and @mW to the associated power. The power is estimated as
> - * P = C * V^2 * f with C being the CPU's capacitance and V and f respectively
> - * the voltage and frequency of the OPP.
> + * P = C * V^2 * f with C being the device's capacitance and V and f
> + * respectively the voltage and frequency of the OPP.
> *
> - * Returns -ENODEV if the CPU device cannot be found, -EINVAL if the power
> - * calculation failed because of missing parameters, 0 otherwise.
> + * Returns -EINVAL if the power calculation failed because of missing
> + * parameters, 0 otherwise.
> */
> -static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz,
> - struct device *cpu_dev)
> +static int __maybe_unused _get_power(unsigned long *mW, unsigned long *kHz,
> + struct device *dev)
> {
> struct dev_pm_opp *opp;
> struct device_node *np;
> @@ -1056,7 +1056,7 @@ static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz,
> u64 tmp;
> int ret;
>
> - np = of_node_get(cpu_dev->of_node);
> + np = of_node_get(dev->of_node);
> if (!np)
> return -EINVAL;
>
> @@ -1066,7 +1066,7 @@ static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz,
> return -EINVAL;
>
> Hz = *kHz * 1000;
> - opp = dev_pm_opp_find_freq_ceil(cpu_dev, &Hz);
> + opp = dev_pm_opp_find_freq_ceil(dev, &Hz);
> if (IS_ERR(opp))
> return -EINVAL;
>
> @@ -1086,30 +1086,38 @@ static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz,
>
> /**
> * dev_pm_opp_of_register_em() - Attempt to register an Energy Model
> - * @cpus : CPUs for which an Energy Model has to be registered
> + * @dev : Device for which an Energy Model has to be registered
> + * @cpus : CPUs for which an Energy Model has to be registered. For
> + * other type of devices it should be set to NULL.
> *
> * This checks whether the "dynamic-power-coefficient" devicetree property has
> * been specified, and tries to register an Energy Model with it if it has.
> + * Having this property means the voltages are known for OPPs and the EM
> + * might be calculated.
> */
> -void dev_pm_opp_of_register_em(struct cpumask *cpus)
> +int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
> {
> - struct em_data_callback em_cb = EM_DATA_CB(_get_cpu_power);
> - int ret, nr_opp, cpu = cpumask_first(cpus);
> - struct device *cpu_dev;
> + struct em_data_callback em_cb = EM_DATA_CB(_get_power);
> struct device_node *np;
> + int ret, nr_opp;
> u32 cap;
>
> - cpu_dev = get_cpu_device(cpu);
> - if (!cpu_dev)
> - return;
> + if (IS_ERR_OR_NULL(dev)) {
> + ret = -EINVAL;
> + goto failed;
> + }
>
> - nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
> - if (nr_opp <= 0)
> - return;
> + nr_opp = dev_pm_opp_get_opp_count(dev);
> + if (nr_opp <= 0) {
> + ret = -EINVAL;
> + goto failed;
> + }
>
> - np = of_node_get(cpu_dev->of_node);
> - if (!np)
> - return;
> + np = of_node_get(dev->of_node);
> + if (!np) {
> + ret = -EINVAL;
> + goto failed;
> + }
>
> /*
> * Register an EM only if the 'dynamic-power-coefficient' property is
> @@ -1120,9 +1128,20 @@ void dev_pm_opp_of_register_em(struct cpumask *cpus)
> */
> ret = of_property_read_u32(np, "dynamic-power-coefficient", &cap);
> of_node_put(np);
> - if (ret || !cap)
> - return;
> + if (ret || !cap) {
> + dev_dbg(dev, "Couldn't find proper 'dynamic-power-coefficient' in DT\n");
> + ret = -EINVAL;
> + goto failed;
> + }
>
> - em_register_perf_domain(cpu_dev, nr_opp, &em_cb, cpus);
> + ret = em_register_perf_domain(dev, nr_opp, &em_cb, cpus);
> + if (ret)
> + goto failed;
> +
> + return 0;
> +
> +failed:
> + dev_dbg(dev, "Couldn't register Energy Model %d\n", ret);
> + return ret;
> }
> EXPORT_SYMBOL_GPL(dev_pm_opp_of_register_em);
> diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
> index 747861816f4f..822ff9f52bf7 100644
> --- a/include/linux/pm_opp.h
> +++ b/include/linux/pm_opp.h
> @@ -11,6 +11,7 @@
> #ifndef __LINUX_OPP_H__
> #define __LINUX_OPP_H__
>
> +#include <linux/energy_model.h>
> #include <linux/err.h>
> #include <linux/notifier.h>
>
> @@ -360,7 +361,11 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpuma
> struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev);
> struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp);
> int of_get_required_opp_performance_state(struct device_node *np, int index);
> -void dev_pm_opp_of_register_em(struct cpumask *cpus);
> +int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus);
> +static inline void dev_pm_opp_of_unregister_em(struct device *dev)
> +{
> + em_unregister_perf_domain(dev);
> +}
> #else
> static inline int dev_pm_opp_of_add_table(struct device *dev)
> {
> @@ -400,7 +405,13 @@ static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp)
> return NULL;
> }
>
> -static inline void dev_pm_opp_of_register_em(struct cpumask *cpus)
> +static inline int dev_pm_opp_of_register_em(struct device *dev,
> + struct cpumask *cpus)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline void dev_pm_opp_of_unregister_em(struct device *dev)
> {
> }
>
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2020-04-03 18:22    [W:0.382 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site