Messages in this thread Patch in this message | | | From | Dan Murphy <> | Subject | [PATCH v22 07/16] ARM: dts: n900: Add reg property to the LP5523 channel node | Date | Wed, 29 Apr 2020 07:56:22 -0500 |
| |
Add the reg property to each channel node. This update is to accomodate the multicolor framework. In addition to the accomodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order.
Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> CC: Tony Lindgren <tony@atomide.com> CC: "Benoît Cousson" <bcousson@baylibre.com> Acked-by: Pavel Machek <pavel@ucw.cz> --- arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..ebe93b06b4f7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -618,63 +618,74 @@ indicator { }; lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - chan0 { + chan@0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <3>; }; - chan4 { + chan@4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <4>; }; - chan5 { + chan@5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <5>; }; - chan6 { + chan@6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <6>; }; - chan7 { + chan@7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <7>; }; - chan8 { + chan@8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <8>; }; }; -- 2.25.1
| |