Messages in this thread | | | From | Andy Shevchenko <> | Date | Sun, 26 Apr 2020 20:43:32 +0300 | Subject | Re: [PATCH 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA |
| |
On Sun, Apr 26, 2020 at 2:03 PM Hans de Goede <hdegoede@redhat.com> wrote: > > Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these > systems the first I2cSerialBus ACPI-resource points to the SMBus Alert > Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource > points to the actual CM3218 sensor address. > > From the ACPI/x86 side devices with more then 1 I2cSerialBus ACPI-resource > are handled by the drivers/platform/x86/i2c-multi-instantiate.c code. > This code will instantiate "cm32181" i2c_client-s for both resources. > > Add a check to cm32181_probe() for the client's address being the ARA > address, and in that case fail the probe with -ENODEV. > > On these ACPI systems the sensor may have a SMBus Alert asserted at boot, > if this is the case the sensor will not respond to any i2c_transfers on > its actual address until we read from the ARA register to clear the Alert. > > Therefor we must (try to) read a byte from the client with the ARA > register, before returning -ENODEV, so that we clear the Alert and when > we get called again for the client instantiated for the second > I2cSerialBus ACPI-resource the sensor will respond to our i2c-transfers. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/iio/light/cm32181.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c > index fd371b36c7b3..e8be20d3902c 100644 > --- a/drivers/iio/light/cm32181.c > +++ b/drivers/iio/light/cm32181.c > @@ -51,6 +51,8 @@ > #define CM32181_CALIBSCALE_RESOLUTION 1000 > #define MLUX_PER_LUX 1000 > > +#define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c > + > static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = { > CM32181_REG_ADDR_CMD, > }; > @@ -333,6 +335,20 @@ static int cm32181_probe(struct i2c_client *client, > struct iio_dev *indio_dev; > int ret; > > + /* > + * Some ACPI systems list 2 I2C resources for the CM3218 sensor, the > + * SMBus Alert Response Address (ARA, 0x0c) and the actual I2C address. > + * drivers/platform/x86/i2c-multi-instantiate.c instantiates "cm32181"
> + * i2c_client-s for both resources, ignore the ARA client.
A nit: 'I2C clients'
> + * On these systems the sensor may have a SMBus Alert asserted at boot, > + * in that case the ARA must be read to clear the Alert otherwise the > + * sensor will not respond on its actual I2C address. > + */ > + if (client->addr == SMBUS_ALERT_RESPONSE_ADDRESS) { > + i2c_smbus_read_byte(client); > + return -ENODEV; > + } > + > indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*cm32181)); > if (!indio_dev) { > dev_err(&client->dev, "devm_iio_device_alloc failed\n"); > -- > 2.26.0 >
-- With Best Regards, Andy Shevchenko
| |