lkml.org 
[lkml]   [2020]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V6 3/4] backlight: qcom-wled: Add WLED5 bindings
Date
Add WLED5 specific bindings.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
---
.../bindings/leds/backlight/qcom-wled.yaml | 59 ++++++++++++++++++++--
1 file changed, 56 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index b835443b..01c7d93 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -21,6 +21,7 @@ properties:
- qcom,pm8941-wled
- qcom,pmi8998-wled
- qcom,pm660l-wled
+ - qcom,pm8150l-wled

reg:
maxItems: 1
@@ -28,12 +29,13 @@ properties:
default-brightness:
description: |
brightness value on boot.
- minimum: 0
- maximum: 4095
- default: 2048

label: true

+ max-brightness:
+ description: |
+ Maximum brightness level.
+
qcom,cs-out:
description: |
enable current sink output.
@@ -141,6 +143,31 @@ properties:
- const: ovp
- const: short

+ qcom,modulator-sel:
+ description: |
+ Selects the modulator used for brightness modulation.
+ Allowed values are,
+ 0 - Modulator A
+ 1 - Modulator B
+ This property is applicable only to WLED5 peripheral.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+ - default: 0
+
+ qcom,cabc-sel:
+ description: |
+ Selects the CABC pin signal used for brightness modulation.
+ Allowed values are,
+ 0 - CABC disabled
+ 1 - CABC 1
+ 2 - CABC 2
+ 3 - External signal (e.g. LPG) is used for dimming
+ This property is applicable only to WLED5 peripheral.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2, 3 ]
+
allOf:
- if:
properties:
@@ -183,6 +210,32 @@ allOf:

interrupt-names:
minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8150l-wled
+
+ then:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 32767
+
+ max-brightness:
+ minimum: 0
+ maximum: 32767
+
+ else:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 4095
+
+ max-brightness:
+ minimum: 0
+ maximum: 4095

required:
- compatible
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-04-23 17:35    [W:0.083 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site