lkml.org 
[lkml]   [2020]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 03/16] kbuild: add infrastructure to build userspace programs
On Thu, Apr 23, 2020 at 4:40 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> Kbuild supports the infrastructure to build host programs, but there
> was no support to build userspace programs for the target architecture
> (i.e. the same architecture as the kernel).
>
> Sam Ravnborg worked on this a long time ago.
>
> https://lkml.org/lkml/2014/7/13/154
>
> But, it was not merged. One problem at that time was, there was no
> good way to know whether $(CC) can link standalone programs. In fact,
> pre-built kernel.org toolchains [1] do not provide libc.
>
> Now, we can handle this cleanly because the compiler capability is
> evaluated at the Kconfig time. If $(CC) cannot link standalone programs,
> the relevant options are hidden by 'depends on CC_CAN_LINK'.
>
> The implementation just mimics scripts/Makefile.host
>
> The userspace programs are compiled with the same flags as the host
> programs. In addition, it uses -m32 or -m64 if it is found in
> $(KBUILD_CFLAGS).
>
> This new syntax has at least two usecases.
>
> - Sample programs
>
> Several userspace programs under samples/ include UAPI headers
> installed in usr/include. Most of them were previously built for
> the host architecture just to use 'hostprogs' syntax.
>
> However, 'make headers' always works for the target architecture.
> This caused the arch mismatch in cross-compiling. To fix this
> distortion, sample code should be built for the target architecture.
>
> - Bpfilter
>
> net/bpfilter/Makefile compiles bpfilter_umh as the user mode helper,
> and embeds it into the kernel code. Currently, it overrides HOSTCC
> with CC to use the 'hostprogs' syntax. This hack should go away.
>
> [1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Makefile | 11 +++++++---
> scripts/Makefile.build | 5 +++++
> scripts/Makefile.clean | 2 +-
> scripts/Makefile.userprogs | 44 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 58 insertions(+), 4 deletions(-)
> create mode 100644 scripts/Makefile.userprogs
>
> diff --git a/Makefile b/Makefile
> index 49b2709ff44e..f20597820131 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -406,9 +406,11 @@ else
> HOSTCC = gcc
> HOSTCXX = g++
> endif
> -KBUILD_HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
> - -fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \
> - $(HOSTCFLAGS)
> +
> +export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
> + -O2 -fomit-frame-pointer -std=gnu89
> +
> +KBUILD_HOSTCFLAGS := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
> KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
> KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
> KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
> @@ -937,6 +939,9 @@ ifeq ($(CONFIG_RELR),y)
> LDFLAGS_vmlinux += --pack-dyn-relocs=relr
> endif
>
> +# Align the bit size of userspace programs with the kernel
> +KBUILD_USERCFLAGS += $(filter -m32 -m64, $(KBUILD_CFLAGS))
> +
> # make the checker run with the right architecture
> CHECKFLAGS += --arch=$(ARCH)
>
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 9fcbfac15d1d..94f2f7016172 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -50,6 +50,11 @@ ifneq ($(hostprogs)$(hostcxxlibs-y)$(hostcxxlibs-m),)
> include scripts/Makefile.host
> endif
>
> +# Do not include userprogs rules unless needed
> +ifneq ($(userprogs),)
> +include scripts/Makefile.userprogs
> +endif
> +
> ifndef obj
> $(warning kbuild: Makefile.build is included improperly)
> endif
> diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
> index 075f0cc2d8d7..e2c76122319d 100644
> --- a/scripts/Makefile.clean
> +++ b/scripts/Makefile.clean
> @@ -29,7 +29,7 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn))
>
> __clean-files := $(extra-y) $(extra-m) $(extra-) \
> $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files) \
> - $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \
> + $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) $(userprogs) \
> $(hostcxxlibs-y) $(hostcxxlibs-m)
>
> __clean-files := $(filter-out $(no-clean-files), $(__clean-files))
> diff --git a/scripts/Makefile.userprogs b/scripts/Makefile.userprogs
> new file mode 100644
> index 000000000000..0d987085819b
> --- /dev/null
> +++ b/scripts/Makefile.userprogs
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Build userspace programs for the target system
> +#
> +
> +userprogs := $(sort $(userprogs))
> +
> +# Executables compiled from a single .c file
> +user-csingle := $(foreach m, $(userprogs), $(if $($(m)-objs),,$(m)))
> +
> +# C executables linked based on several .o files
> +user-cmulti := $(foreach m, $(userprogs), $(if $($(m)-objs),$(m)))
> +
> +# Object (.o) files compiled from .c files
> +user-cobjs := $(foreach m, $(userprogs), $($(m)-objs))
> +
> +user-csingle := $(addprefix $(obj)/, $(user-csingle))
> +user-cmulti := $(addprefix $(obj)/, $(user-cmulti))
> +user-cobjs := $(addprefix $(obj)/, $(user-cobjs))
> +
> +user_c_flags = -Wp,-MMD,$(depfile) $(KBUILD_USERCFLAGS) $(user-ccflags) \
> + $($(target-stem)-ccflags)
> +
> +# Create an executable from a single .c file
> +quiet_cmd_user_cc_c = CC [U] $@
> + cmd_user_cc_c = $(CC) $(user_c_flags) -o $@ $<


$($(target-stem)-ldlibs)

is needed here too.



> +$(user-csingle): $(obj)/%: $(src)/%.c FORCE
> + $(call if_changed_dep,user_cc_c)
> +
> +# Link an executable based on list of .o files
> +quiet_cmd_user_ld = LD [U] $@
> + cmd_user_ld = $(CC) -o $@ $(addprefix $(obj)/, $($(target-stem)-objs)) \
> + $($(target-stem)-ldlibs)
> +$(user-cmulti): FORCE
> + $(call if_changed,user_ld)
> +$(call multi_depend, $(user-cmulti), , -objs)
> +
> +# Create .o file from a .c file
> +quiet_cmd_user_cc_o_c = CC [U] $@
> + cmd_user_cc_o_c = $(CC) $(user_c_flags) -c -o $@ $<
> +$(user-cobjs): $(obj)/%.o: $(src)/%.c FORCE
> + $(call if_changed_dep,user_cc_o_c)
> +
> +targets += $(user-csingle) $(user-cmulti) $(user-cobjs)
> --
> 2.25.1
>


--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2020-04-23 17:17    [W:0.229 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site