lkml.org 
[lkml]   [2020]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 3/5] usb: xhci: Add support for Renesas controller with memory
On 23-04-20, 17:07, Mathias Nyman wrote:
> On 14.4.2020 19.41, Vinod Koul wrote:
> > Some rensas controller like uPD720201 and uPD720202 need firmware to be
> > loaded. Add these devices in table and invoke renesas firmware loader
> > functions to check and load the firmware into device memory when
> > required.
> >
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> > drivers/usb/host/xhci-pci.c | 33 +++++++++++++++++++++++++++++++++
> > drivers/usb/host/xhci.h | 1 +
> > 2 files changed, 34 insertions(+)
> >
> > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > index b6c2f5c530e3..11521e2e1720 100644
> > --- a/drivers/usb/host/xhci-pci.c
> > +++ b/drivers/usb/host/xhci-pci.c
> > @@ -15,6 +15,7 @@
> >
> > #include "xhci.h"
> > #include "xhci-trace.h"
> > +#include "xhci-pci.h"
> >
> > #define SSIC_PORT_NUM 2
> > #define SSIC_PORT_CFG2 0x880c
> > @@ -328,6 +329,21 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> > int retval;
> > struct xhci_hcd *xhci;
> > struct usb_hcd *hcd;
> > + struct xhci_driver_data *driver_data;
> > +
> > + driver_data = (struct xhci_driver_data *)id->driver_data;
> > +
> > + if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> > + retval = renesas_xhci_pci_probe(dev, id);
> > + switch (retval) {
> > + case 0: /* fw check success, continue */
> > + break;
> > + case 1: /* fw will be loaded by async load */
> > + return 0;
>
> This is no longer true, right?

Correct.

> To me it looks like renesas_xhci_pci_probe() returns 0 on success, both if
> firmware was already running or if successfully loaded, and negative on error

Yes now it does that and I will update this part..
>
> While changing this the function name "renesas_xhci_pci_probe()" should be
> changed as well. This isn't anymore a separate firmware loading driver, just a
> a lot of renesas firmware loading code.
>
> You could call renesas_xhci_check_request_fw() directly instead:
>
> if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> retval = renesas_xhci_check_request_fw(dev, id);
> if (retval)
> return retval;
> }

Yes I can remove this layer and directly invoke the internal function..

Thanks for the comments

--
~Vinod

\
 
 \ /
  Last update: 2020-04-23 16:33    [W:0.042 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site