lkml.org 
[lkml]   [2020]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] scsi: storvsc: Fix a panic in the hibernation procedure
From
Date
On 4/21/20 11:24 PM, Dexuan Cui wrote:
> Upon suspend, I suppose the other LLDs can not accept I/O either, then
> what do they do when some kernel thread still tries to submit I/O? Do
> they "block" the I/O until resume, or just return an error immediately?

This is my understanding of how other SCSI LLDs handle suspend/resume:
- The ULP driver, e.g. the SCSI sd driver, implements power management
support by providing callbacks in struct scsi_driver.gendrv.pm and also
in scsi_bus_type.pm. The SCSI sd suspend callbacks flush the device
cache and send a STOP command to the device.
- SCSI LLDs for PCIe devices optionally provide pci_driver.suspend and
resume callbacks. These callbacks can be used to make the PCIe device
enter/leave a power saving state. No new SCSI commands should be
submitted after pci_driver.suspend has been called.

> I had a look at drivers/scsi/xen-scsifront.c. It looks this LLD implements
> a mechanism of marking the device busy upon suspend, so any I/O will
> immediately get an error SCSI_MLQUEUE_HOST_BUSY. IMO the
> disadvantage is: the mechanism of marking the device busy looks
> complex, and the hot path .queuecommand() has to take the
> spinlock shost->host_lock, which should affect the performance.

I think the code you are referring to is the code in
scsifront_suspend(). A pointer to that function is stored in a struct
xenbus_driver instance. That's another structure than the structures
mentioned above.

Wouldn't it be better to make sure that any hypervisor suspend
operations happen after it is guaranteed that no further SCSI commands
will be submitted such that hypervisor suspend operations do not have to
deal with SCSI commands submitted during or after the hypervisor suspend
callback?

> It looks drivers/scsi/nsp32.c: nsp32_suspend() and
> drivers/scsi/3w-9xxx.c: twa_suspend() do nothing to handle new I/O
> after suspend. I doubt this is correct.

nsp32_suspend() is a PCI suspend callback. If any SCSI commands would be
submitted after that callback has started that would mean that the SCSI
suspend and PCIe suspend operations are called in the wrong order. I do
not agree that code for suspending SCSI commands should be added in
nsp32_suspend().

> So it looks to me there is no simple mechanism to handle the scenario
> here, and I guess that's why the scsi_host_block/unblock APIs are
> introduced, and actually there is already an user of the APIs:
> 3d3ca53b1639 ("scsi: aacraid: use scsi_host_(block,unblock) to block I/O").
>
> The aacraid patch says: "This has the advantage that the block layer will
> stop sending I/O to the adapter instead of having the SCSI midlayer
> requeueing I/O internally". It looks this may imply that using the new
> APIs is encouraged?

I'm fine with using these new functions in device reset handlers. Using
these functions in power management handlers seems wrong to me.

> PS, here storvsc has to destroy and re-construct the I/O queues: the
> I/O queues are shared memory ringbufers between the guest and the
> host; in the resume path of the hibernation procedure, the memory
> pages allocated by the 'new' kernel is different from that allocated by
> the 'old' kernel, so before jumping to the 'old' kernel, the 'new' kernel
> must destroy the mapping of the pages, and later after we jump to
> the 'old' kernel, we'll re-create the mapping using the pages allocated
> by the 'old' kernel. Here "create the mapping" means the guest tells
> the host about the physical addresses of the pages.

Thank you for having clarified this. This helps me to understand the HV
driver framework better. I think this means that the hv_driver.suspend
function should be called at a later time than SCSI suspend. From
Documentation/driver-api/device_link.rst: "By default, the driver core
only enforces dependencies between devices that are borne out of a
parent/child relationship within the device hierarchy: When suspending,
resuming or shutting down the system, devices are ordered based on this
relationship, i.e. children are always suspended before their parent,
and the parent is always resumed before its children." Is there a single
storvsc_drv instance for all SCSI devices supported by storvsc_drv? Has
it been considered to make storvsc_drv the parent device of all SCSI
devices created by the storvsc driver?

Thanks,

Bart.

\
 
 \ /
  Last update: 2020-04-22 21:56    [W:0.100 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site