lkml.org 
[lkml]   [2020]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] dt-bindings: iio: scd30: add device binding file
Date
Add SCD30 sensor binding file.

Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
---
.../iio/chemical/sensirion,scd30.yaml | 71 +++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml

diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 000000000000..b092b2530c76
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+ - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+ Air quality sensor capable of measuring co2 concentration, temperature
+ and relative humidity.
+
+properties:
+ compatible:
+ enum:
+ - sensirion,scd30
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+ sensirion,sel-gpios:
+ description: GPIO connected to the SEL line
+ maxItems: 1
+
+ sensirion,pwm-gpios:
+ description: GPIO connected to the PWM line
+ maxItems: 1
+
+required:
+ - compatible
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ # include <dt-bindings/gpio/gpio.h>
+ # include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scd30@61 {
+ compatible = "sensirion,scd30";
+ reg = <0x61>;
+ vdd-supply = <&vdd>;
+ interrupt-parrent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ - |
+ # include <dt-bindings/gpio/gpio.h>
+ # include <dt-bindings/interrupt-controller/irq.h>
+ serial {
+ scd30 {
+ compatible = "sensirion,scd30";
+ vdd-supply = <&vdd>;
+ interrupt-parrent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+...
--
2.26.1
\
 
 \ /
  Last update: 2020-04-22 16:21    [W:0.207 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site