lkml.org 
[lkml]   [2020]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
Date
On Sat, 18 Apr 2020 14:35:22 +0200, Vincent Stehlé <vincent.stehle@laposte.net> wrote:
> The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.
>
> This has been verified on a board and somewhat confirmed by both the GPIO
> name ("STATUS_LED_N") and the reduced schematics [1].
>
> [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf
>
> Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
> Cc: Stefan Wahren <stefan.wahren@i2se.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> ---

Applied to devicetree/fixes, thanks!
--
Florian

\
 
 \ /
  Last update: 2020-04-22 00:27    [W:0.057 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site