lkml.org 
[lkml]   [2020]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: i2c: i2c-stm32f7: allow clock-frequency range
Date
For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
match, the bus clock frequency can be from 1Hz to 1MHz.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v3: identical to v1 & v2

Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 900ec1ab6a47..b50a2f420b36 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -80,11 +80,11 @@ properties:
clock-frequency:
description: Desired I2C bus clock frequency in Hz. If not specified,
the default 100 kHz frequency will be used.
- For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
- Fast-mode and Fast-mode Plus are supported, possible
- values are 100000, 400000 and 1000000.
+ For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+ match, the bus clock frequency can be from 1Hz to 1MHz.
default: 100000
- enum: [100000, 400000, 1000000]
+ minimum: 1
+ maximum: 1000000

required:
- compatible
--
2.7.4
\
 
 \ /
  Last update: 2020-04-20 16:58    [W:0.042 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site