lkml.org 
[lkml]   [2020]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 9/9] arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64
Date
Enable CPU and GPU opp tables for Pine H64.

This needs to change the CPU regulator max voltage to fit
the OPP table.

Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 63a785b534e1..af85b2074867 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -4,6 +4,7 @@
/dts-v1/;

#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -80,6 +81,10 @@
};
};

+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
&de {
status = "okay";
};
@@ -238,7 +243,8 @@
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};

@@ -246,6 +252,7 @@
regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};

--
2.20.1
\
 
 \ /
  Last update: 2020-04-20 15:01    [W:0.097 / U:1.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site