lkml.org 
[lkml]   [2020]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v9 1/2] Documentation: fpga: dfl: add description for performance reporting support
Date
> -----Original Message-----
> From: linux-fpga-owner@vger.kernel.org <linux-fpga-owner@vger.kernel.org>
> On Behalf Of Randy Dunlap
> Sent: Saturday, April 18, 2020 8:08 AM
> To: Wu, Hao <hao.wu@intel.com>; will@kernel.org; mdf@kernel.org;
> mark.rutland@arm.com; gregkh@linuxfoundation.org; linux-
> fpga@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: linux-api@vger.kernel.org; atull@kernel.org; Xu, Yilun
> <yilun.xu@intel.com>; trix@redhat.com; bhu@redhat.com
> Subject: Re: [PATCH v9 1/2] Documentation: fpga: dfl: add description for
> performance reporting support
>
> Hi--
>
> Here are a few comments for you:

Thanks a lot for the comments, will fix all of them in the next version. : )

Hao


>
> On 4/16/20 10:39 PM, Wu Hao wrote:
> > From: Xu Yilun <yilun.xu@intel.com>
> >
> > This patch adds description for performance reporting support for
> > Device Feature List (DFL) based FPGA.
> >
> > Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> > Signed-off-by: Wu Hao <hao.wu@intel.com>
> > ---
> > Documentation/fpga/dfl.rst | 84
> ++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 84 insertions(+)
> >
> > diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
> > index 094fc8a..6ccaf77 100644
> > --- a/Documentation/fpga/dfl.rst
> > +++ b/Documentation/fpga/dfl.rst
>
> > @@ -378,6 +383,85 @@ The device nodes used for ioctl() or mmap() can
> be referenced through::
> > /sys/class/fpga_region/<regionX>/<dfl-port.n>/dev
> >
> >
> > +Performance Counters
> > +====================
> > +Performance reporting is one private feature implemented in FME. It
> could
> > +supports several independent, system-wide, device counter sets in
> hardware to
> > +monitor and count for performance events, including "basic", "cache",
> "fabric",
> > +"vtd" and "vtd_sip" counters. Users could use standard perf tool to
> monitor
> > +FPGA cache hit/miss rate, transaction number, interface clock counter of
> AFU
> > +and other FPGA performance events.
> > +
> > +Different FPGA devices may have different counter sets, it depends on
> hardware
>
> sets, depending on hardware
>
> > +implementation. e.g. some discrete FPGA cards don't have any cache.
> User could
>
> E.g., some
>
> > +use "perf list" to check which perf events are supported by target
> hardware.
> > +
> > +In order to allow user to use standard perf API to access these
> performance
> > +counters, driver creates a perf PMU, and related sysfs interfaces in
> > +/sys/bus/event_source/devices/dfl_fme* to describe available perf events
> and
> > +configuration options.
> > +
> > +The "format" directory describes the format of the config field of struct
> > +perf_event_attr. There are 3 bitfields for config, "evtype" defines which
> type
>
> config: "evtype"
>
> > +the perf event belongs to. "event" is the identity of the event within its
>
> belongs to; "event" is
>
> > +category. "portid" is introduced to decide counters set to monitor on FPGA
>
> category; "portid" is
>
> > +overall data or a specific port.
> > +
> > +The "events" directory describes the configuration templates for all
> available
> > +events which can be used with perf tool directly. For example,
> fab_mmio_read
> > +has the configuration "event=0x06,evtype=0x02,portid=0xff", which
> shows this
> > +event belongs to fabric type (0x02), the local event id is 0x06 and it is for
> > +overall monitoring (portid=0xff).
> > +
> > +Example usage of perf::
> > +
> > + $# perf list |grep dfl_fme
> > +
> > + dfl_fme0/fab_mmio_read/ [Kernel PMU event]
> > + <...>
> > + dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
> > + <...>
> > +
> > + $# perf stat -a -e dfl_fme0/fab_mmio_read/ <command>
> > + or
> > + $# perf stat -a -e dfl_fme0/event=0x06,evtype=0x02,portid=0xff/
> <command>
> > + or
> > + $# perf stat -a -e dfl_fme0/config=0xff2006/ <command>
> > +
> > +Another example, fab_port_mmio_read monitors mmio read of a specific
> port. So
> > +its configuration template is "event=0x06,evtype=0x01,portid=?". The
> portid
> > +should be explicitly set.
> > +
> > +Its usage of perf::
> > +
> > + $# perf stat -a -e dfl_fme0/fab_port_mmio_read,portid=0x0/ <command>
> > + or
> > + $# perf stat -a -e dfl_fme0/event=0x06,evtype=0x02,portid=0x0/
> <command>
> > + or
> > + $# perf stat -a -e dfl_fme0/config=0x2006/ <command>
> > +
> > +Please note for fabric counters, overall perf events (fab_*) and port perf
> > +events (fab_port_*) actually share one set of counters in hardware, so it
> can't
> > +monitor both at the same time. If this set of counters is configured to
> monitor
> > +overall data, then per port perf data is not supported. See below example::
> > +
> > + $# perf stat -e
> dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,\
> > + portid=0/ sleep 1
> > +
> > + Performance counter stats for 'system wide':
> > +
> > + 3 dfl_fme0/fab_mmio_read/
> > + <not supported> dfl_fme0/fab_port_mmio_write,portid=0x0/
> > +
> > + 1.001750904 seconds time elapsed
> > +
> > +The driver also provides a "cpumask" sysfs attribute, which contains only
> one
> > +cpu id used to access these perf events. Counting on multiple CPUs is not
> CPU
>
> > +allowed since they are system-wide counters on FPGA device.
> > +
> > +The current driver does not support sampling. So "perf record" is
> unsupported.
> > +
> > +
> > Add new FIUs support
> > ====================
> > It's possible that developers made some new function blocks (FIUs) under
> this
> >
>
> thanks.
> --
> ~Randy

\
 
 \ /
  Last update: 2020-04-20 11:38    [W:0.074 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site