lkml.org 
[lkml]   [2020]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 2/3] net: phy: add Broadcom BCM54140 support
On Mon, Apr 20, 2020 at 08:21:12PM +0200, Michael Walle wrote:
> The Broadcom BCM54140 is a Quad SGMII/QSGMII Copper/Fiber Gigabit
> Ethernet transceiver.
>
> This also adds support for tunables to set and get downshift and
> energy detect auto power-down.
>
> The PHY has four ports and each port has its own PHY address.
> There are per-port registers as well as global registers.
> Unfortunately, the global registers can only be accessed by reading
> and writing from/to the PHY address of the first port. Further,
> there is no way to find out what port you actually are by just
> reading the per-port registers. We therefore, have to scan the
> bus on the PHY probe to determine the port and thus what address
> we need to access the global registers.
>
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-04-20 21:58    [W:0.167 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site