lkml.org 
[lkml]   [2020]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v8 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings
On Fri, Apr 17, 2020 at 2:57 AM Lee Jones <lee.jones@linaro.org> wrote:
>
> On Fri, 27 Mar 2020, Tim Harvey wrote:
>
> > This patch adds documentation of device-tree bindings for the
> > Gateworks System Controller (GSC).
> >
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>

<snip>

> > ---
> > .../devicetree/bindings/mfd/gateworks-gsc.yaml | 194 +++++++++++++++++++++
> > 1 file changed, 194 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> > new file mode 100644
> > index 00000000..a96751c9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> > @@ -0,0 +1,194 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Gateworks System Controller multi-function device
>
> I'd prefer if you didn't use Linuxisums in DT docs.
>
> A 'multi-function device' isn't a thing - we made it up.
>
> Nowhere in the documentation [0] is the Gateworks System Controller
> described as a multi-function device.
>
> [0] http://trac.gateworks.com/wiki/gsc
>
> > +description: |
> > + The GSC is a Multifunction I2C slave device with the following submodules:
>
> No it isn't. It's a:
>
> "The Gateworks System Controller (GSC) is a device present across
> various Gateworks product families that provides a set of system
> related feature such as the following (refer to the board hardware
> user manuals to see what features are present)"
>
> > + - Watchdog Timer
> > + - GPIO
> > + - Pushbutton controller
> > + - Hardware Monitor with ADC's for temperature and voltage rails and
> > + fan controller
>
> Why is "Monitor" capitalised, but "controller" is not?
>
> I would s/Monitor/monitor/ here.
>
> > +maintainers:
> > + - Tim Harvey <tharvey@gateworks.com>
> > + - Robert Jones <rjones@gateworks.com>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "gsc@[0-9a-f]{1,2}"
> > + compatible:
> > + const: gw,gsc
> > +
> > + reg:
> > + description: I2C device address
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-controller: true
> > +
> > + "#interrupt-cells":
> > + const: 1
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + adc:
> > + type: object
> > + description: Optional Hardware Monitoring module
>
> Again, an odd thing to capitalise.
>
> > + properties:
> > + compatible:
> > + const: gw,gsc-adc
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + patternProperties:
> > + "^channel@[0-9]+$":
> > + type: object
> > + description: |
> > + Properties for a single ADC which can report cooked values
> > + (ie temperature sensor based on thermister), raw values
> > + (ie voltage rail with a pre-scaling resistor divider).
>
> /ie/i.e./
>
> > + properties:
> > + reg:
> > + description: Register of the ADC
> > + maxItems: 1
> > +
> > + label:
> > + description: Name of the ADC input
> > +
> > + gw,mode:
> > + description: |
> > + conversion mode:
> > + 0 - temperature, in C*10
> > + 1 - pre-scaled voltage value
> > + 2 - scaled voltage based on an optional resistor divider
> > + and optional offset
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32
>
> Rob just submitted a patch-set to remove 'allOf's from '$ref'
> properties.
>
> > + enum: [0, 1, 2]
> > +
> > + gw,voltage-divider-ohms:
> > + description: values of resistors for divider on raw ADC input
>
> s/values/Values/
>
> > + maxItems: 2
> > + items:
> > + minimum: 1000
> > + maximum: 1000000
> > +
> > + gw,voltage-offset-microvolt:
> > + description: |
> > + A positive voltage offset to apply to a raw ADC
> > + (ie to compensate for a diode drop).
>
> s/ie/i.e/
>
> > + minimum: 0
> > + maximum: 1000000
> > +
> > + required:
> > + - gw,mode
> > + - reg
> > + - label
> > +
> > + required:
> > + - compatible
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +patternProperties:
> > + "^fan-controller@[0-9a-f]+$":
> > + type: object
> > + description: Optional FAN controller
>
> "Fan"
>
> > + properties:
> > + compatible:
> > + const: gw,gsc-fan
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + reg:
> > + description: The fan controller base address
> > + maxItems: 1
> > +
> > + required:
> > + - compatible
> > + - reg
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-controller
> > + - "#interrupt-cells"
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gsc@20 {
> > + compatible = "gw,gsc";
> > + reg = <0x20>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <4 GPIO_ACTIVE_LOW>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + adc {
> > + compatible = "gw,gsc-adc";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + channel@0 { /* A0: Board Temperature */
> > + reg = <0x00>;
> > + label = "temp";
> > + gw,mode = <0>;
> > + };
> > +
> > + channel@2 { /* A1: Input Voltage (raw ADC) */
> > + reg = <0x02>;
> > + label = "vdd_vin";
> > + gw,mode = <1>;
> > + gw,voltage-divider-ohms = <22100 1000>;
> > + gw,voltage-offset-microvolt = <800000>;
> > + };
> > +
> > + channel@b { /* A2: Battery voltage */
> > + reg = <0x0b>;
> > + label = "vdd_bat";
> > + gw,mode = <1>;
> > + };
> > + };
> > +
> > + fan-controller@2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "gw,gsc-fan";
> > + reg = <0x2c>;
> > + };
> > + };
> > + };
>

Lee,

Thanks for the review. I will send a v9 once you have had time to
review the mfd driver patch in this series.

Best Regards,

Tim

\
 
 \ /
  Last update: 2020-04-20 17:29    [W:0.061 / U:2.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site