lkml.org 
[lkml]   [2020]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
Hi Ezequiel,


Le dim. 19 avril 2020 à 9:54, Ezequiel Garcia
<ezequiel@vanguardiasur.com.ar> a écrit :
> On Fri, 17 Apr 2020 at 18:54, Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
>>
>> On Sat, Apr 18, 2020 at 12:45 AM Paul Cercueil
>> <paul@crapouillou.net> wrote:
>> > Le sam. 18 avril 2020 à 0:42, Andy Shevchenko
>> > <andy.shevchenko@gmail.com> a écrit :
>> > > On Sat, Apr 18, 2020 at 12:18 AM Paul Cercueil
>> <paul@crapouillou.net>
>> > > wrote:
>> > >> Le sam. 18 avril 2020 à 0:13, Andy Shevchenko
>> > >> <andy.shevchenko@gmail.com> a écrit :
>> > >> > On Sat, Apr 18, 2020 at 12:05 AM Paul Cercueil
>> > >> <paul@crapouillou.net>
>> > >> > wrote:
>> > >> >> Le ven. 17 avril 2020 à 23:59, Andy Shevchenko
>> > >> >> <andy.shevchenko@gmail.com> a écrit :
>> > >> >> > On Fri, Apr 17, 2020 at 11:21 PM Artur Rojek
>> > >> >> <contact@artur-rojek.eu>
>> > >> >> > wrote:
>> > >> >
>> > >> > ...
>> > >> >
>> > >> >> >> + irq = platform_get_irq(pdev, 0);
>> > >> >> >
>> > >> >> > Before it worked w/o IRQ, here is a regression you
>> introduced.
>> > >> >>
>> > >> >> Before it simply did not need the IRQ, which is provided
>> by the
>> > >> >> devicetree anyway. No regression here.
>> > >> >
>> > >> > Does it work without IRQ? Or it was a dead code till now?
>> > >> > For me it's clear regression. Otherwise something is really
>> wrong
>> > >> in a
>> > >> > process of development of this driver.
>> > >>
>> > >> Nothing wrong here. The IRQ was not used by the driver for the
>> > >> functionality it provided before. It is required now to
>> support the
>> > >> touchscreen channels.
>> > >
>> > > This is exactly what's wrong.
>> > > Previous DTS for my (hypothetical) case has no IRQ defined.
>> Everything
>> > > works, right?
>> > > Now, due to this change it breaks my setup. Don't you see the
>> problem?
>> >
>> > The IRQ has been provided by every concerned DTS file since the
>> > introduction of this driver and the related bindings, even though
>> it
>> > was not used by the driver.
>>
>> Can you speak for all possible DTSs/DTBs in the wild?
>> Okay, in any case it will be problem of maintainers and yours if
>> somebody complains.
>> I'm not going to push this anyway -- your choice.
>>
>> But I see a (potential) regression.
>>
>
> So, there are a few things to keep in mind here.
>
> Let's abstract ourselves from this specific driver
> for a minute.
>
> First, and just as Andy pointed out, we can never be fully
> sure about DTBs out there. These could be out of tree,
> so out of our control. By introducing a new requirement
> we break them, which may be seen as a regression.
>
> Second, the interrupt is not required as per
> current mainline bindings/iio/adc/ingenic,adc.txt,
> so it is perfectly legal for users to not have an interrupt
> specified.
>
> Now, back to this case, I think we can get away with this
> change, provided this hardware is not that widespread
> among developers/users that follow upstream closely.
>
> I suspect anyone developing a serious platform
> with this SoC is most likely using some vendor kernel.
>
> If that is not the case, i.e. if you have users _actually_
> using this upstream driver, then we should consider
> making the interrupt optional instead of required.
>
> Or we can also just break it and hope nobody
> complaints.

The vast majority of Ingenic devices running Linux use a 3.x kernel
with a lot of patches on top. These kernels don't support devicetree.
So there is no problem with legacy devicetree files: there are no
legacy devicetree files.

Of the few Ingenic devices running mainline kernels, all of them with
an ADC node in the devicetree have the 'interrupts' property specified,
out-of-tree or in-tree.

As the informal Ingenic SoCs maintainer I'm pretty aware of these
things, and I can assure that we're not breaking anything. The only
thing broken is the documentation which doesn't specify that the
'interrupts' property is required.

> BTW, this series looks great and I'm happy
> to see JZ47xx activity :-)
>
> Arthur: perhaps you can consider converting the txt dt binding
> to yaml?

That would be great.

-Paul


\
 
 \ /
  Last update: 2020-04-19 15:24    [W:0.051 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site