lkml.org 
[lkml]   [2020]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 2/4] net: phy: Add support for AC200 EPHY
From
Date
On 17.04.2020 18:15, Jernej Škrabec wrote:
> Dne četrtek, 16. april 2020 ob 22:18:52 CEST je Heiner Kallweit napisal(a):
>> On 16.04.2020 20:57, Jernej Skrabec wrote:
>>> AC200 MFD IC supports Fast Ethernet PHY. Add a driver for it.
>>>
>>> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
>>> ---
>>>
>>> drivers/net/phy/Kconfig | 7 ++
>>> drivers/net/phy/Makefile | 1 +
>>> drivers/net/phy/ac200.c | 206 +++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 214 insertions(+)
>>> create mode 100644 drivers/net/phy/ac200.c
>>>
>>> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
>>> index 3fa33d27eeba..16af69f69eaf 100644
>>> --- a/drivers/net/phy/Kconfig
>>> +++ b/drivers/net/phy/Kconfig
>>> @@ -288,6 +288,13 @@ config ADIN_PHY
>>>
>>> - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
>>>
>>> Ethernet PHY
>>>
>>> +config AC200_PHY
>>> + tristate "AC200 EPHY"
>>> + depends on NVMEM
>>> + depends on OF
>>> + help
>>> + Fast ethernet PHY as found in X-Powers AC200 multi-function
> device.
>>> +
>>>
>>> config AMD_PHY
>>>
>>> tristate "AMD PHYs"
>>> ---help---
>>>
>>> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
>>> index 2f5c7093a65b..b0c5b91900fa 100644
>>> --- a/drivers/net/phy/Makefile
>>> +++ b/drivers/net/phy/Makefile
>>> @@ -53,6 +53,7 @@ obj-$(CONFIG_SFP) += sfp.o
>>>
>>> sfp-obj-$(CONFIG_SFP) += sfp-bus.o
>>> obj-y += $(sfp-obj-y) $(sfp-obj-m)
>>>
>>> +obj-$(CONFIG_AC200_PHY) += ac200.o
>>>
>>> obj-$(CONFIG_ADIN_PHY) += adin.o
>>> obj-$(CONFIG_AMD_PHY) += amd.o
>>> aquantia-objs += aquantia_main.o
>>>
>>> diff --git a/drivers/net/phy/ac200.c b/drivers/net/phy/ac200.c
>>> new file mode 100644
>>> index 000000000000..3d7856ff8f91
>>> --- /dev/null
>>> +++ b/drivers/net/phy/ac200.c
>>> @@ -0,0 +1,206 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/**
>>> + * Driver for AC200 Ethernet PHY
>>> + *
>>> + * Copyright (c) 2020 Jernej Skrabec <jernej.skrabec@siol.net>
>>> + */
>>> +
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/mfd/ac200.h>
>>> +#include <linux/nvmem-consumer.h>
>>> +#include <linux/of.h>
>>> +#include <linux/phy.h>
>>> +#include <linux/platform_device.h>
>>> +
>>> +#define AC200_EPHY_ID 0x00441400
>>> +#define AC200_EPHY_ID_MASK 0x0ffffff0
>>> +
>>
>> You could use PHY_ID_MATCH_MODEL() here.
>
> Hm... This doesn't work with dynamically allocated memory, right?
>
Right ..

> Best regards,
> Jernej
>
>

\
 
 \ /
  Last update: 2020-04-17 18:29    [W:0.057 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site