Messages in this thread | | | Date | Fri, 17 Apr 2020 11:13:50 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v2 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings |
| |
On Thu, 16 Apr 2020 14:54:41 -0700, Ben Levinsky wrote: > Add binding for ZynqMP R5 OpenAMP. > > Represent the RPU domain resources in one device node. Each RPU > processor is a subnode of the top RPU domain node. > > Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> > Signed-off-by: Jason Wu <j.wu@xilinx.com> > Signed-off-by: Wendy Liang <jliang@xilinx.com> > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > .../remoteproc/xilinx,zynqmp-r5-remoteproc.yaml | 119 +++++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml >
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:20.14-21: Warning (ranges_format): /example-0/reserved-memory:ranges: empty "ranges" property but its #address-cells (2) differs from /example-0 (1) Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:20.14-21: Warning (ranges_format): /example-0/reserved-memory:ranges: empty "ranges" property but its #size-cells (2) differs from /example-0 (1) Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:43.14-21: Warning (ranges_format): /example-0/zynqmp-rpu:ranges: empty "ranges" property but its #address-cells (2) differs from /example-0 (1) Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:43.14-21: Warning (ranges_format): /example-0/zynqmp-rpu:ranges: empty "ranges" property but its #size-cells (2) differs from /example-0 (1) Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:39.20-63.11: Warning (unit_address_vs_reg): /example-0/zynqmp-rpu: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dts:46.25-62.16: Warning (unit_address_vs_reg): /example-0/zynqmp-rpu/r5@0: node has a unit name, but no reg or ranges property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.example.dt.yaml: zynqmp-rpu: '#address-cells', '#size-cells', 'r5@0', 'ranges', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+'
See https://patchwork.ozlabs.org/patch/1271919
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
| |