lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 070/232] ASoC: dapm: connect virtual mux with default value
Date
From: 이경택 <gt82.lee@samsung.com>

commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.

Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
sound/soc/soc-dapm.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -802,7 +802,13 @@ static void dapm_set_mixer_path_status(s
val = max - val;
p->connect = !!val;
} else {
- p->connect = 0;
+ /* since a virtual mixer has no backing registers to
+ * decide which path to connect, it will try to match
+ * with initial state. This is to ensure
+ * that the default mixer choice will be
+ * correctly powered up during initialization.
+ */
+ p->connect = invert;
}
}


\
 
 \ /
  Last update: 2020-04-16 16:08    [W:0.659 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site