lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] i2c: drivers: Avoid unnecessary check inefm32_i2c_probe()
From
Date
Hi Uwe:

On 2020/4/16 14:50, Uwe Kleine-König wrote:
>>>> diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
>>>> index 4de31fae7..4786ef6b2 100644
>>>> --- a/drivers/i2c/busses/i2c-efm32.c
>>>> +++ b/drivers/i2c/busses/i2c-efm32.c
>>>> @@ -312,9 +312,6 @@ static int efm32_i2c_probe(struct platform_device *pdev)
>>>> int ret;
>>>> u32 clkdiv;
>>>> - if (!np)
>>>> - return -EINVAL;
>>>> -
>>> I don't care much about this change. While the statement that this
>>> driver is only instantiated on dt platforms is probably right,
>>> explicitly checking for it might still prevent surprises later, serves
>>> as explicit statement for the driver reader that non-dt isn't supposed
>>> to work and given that the check is cheap I tend slightly to just keep
>>> it.
>>>
>> In this driver, the function efm32_i2c_probe() can be triggered only if the
>> platform_device and platform_driver matches,  and the matching condition is
>> DTS. It's my opinion.
> I admit I didn't recheck, but I think the driver will also be matched on
> non-dt platforms that provide an "efm32-i2c" device.

Year, I agree with you, the driver should be matched on dt or non-dt
platforms. But for non-dt platforms, I think this driver may need minor
changes, after all, it is just suitable for the dt platforms right now.
That's my shallow opinions.

Thanks for your patient guidance and reply, thank you. I think you are
also a good teacher, thanks.

Tang Bin

>



\
 
 \ /
  Last update: 2020-04-16 11:03    [W:0.051 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site