lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/5] media: i2c: ov5645: Drop reading clock-frequency dt-property
Hi Sakari,

On Wed, Apr 15, 2020 at 07:27:22PM +0300, Sakari Ailus wrote:
> On Tue, Apr 14, 2020 at 11:55:52PM +0300, Laurent Pinchart wrote:
> > On Tue, Apr 07, 2020 at 06:14:01PM +0300, Sakari Ailus wrote:
> >> On Tue, Apr 07, 2020 at 03:21:06PM +0300, Laurent Pinchart wrote:
> >>> On Tue, Apr 07, 2020 at 09:22:41AM +0300, Sakari Ailus wrote:
> >>>> On Mon, Apr 06, 2020 at 08:32:34PM +0300, Laurent Pinchart wrote:
> >>>>> On Mon, Apr 06, 2020 at 07:51:08PM +0300, Sakari Ailus wrote:
> >>>>>> On Mon, Apr 06, 2020 at 05:42:38PM +0100, Lad Prabhakar wrote:
> >>>>>>> Modes in the driver are based on xvclk frequency fixed to 24MHz, but where
> >>>>>>> as the OV5645 sensor can support the xvclk frequency ranging from 6MHz to
> >>>>>>> 24MHz. So instead making clock-frequency as dt-property just let the
> >>>>>>> driver enforce the required clock frequency.
> >>>>>>
> >>>>>> Even if some current systems where the driver is used are using 24 MHz
> >>>>>> clock, that doesn't mean there wouldn't be systems using another frequency
> >>>>>> that the driver does not support right now.
> >>>>>>
> >>>>>> The driver really should not set the frequency unless it gets it from DT,
> >>>>>> but I think the preferred means is to use assigned-clock-rates instead, and
> >>>>>> not to involve the driver with setting the frequency.
> >>>>>>
> >>>>>> Otherwise we'll make it impossible to support other frequencies, at least
> >>>>>> without more or less random defaults.
> >>>>>
> >>>>> We're running in circles here.
> >>>>>
> >>>>> As the driver only supports 24MHz at the moment, the frequency should be
> >>>>> set by the driver, as it's a driver limitation. We can then work on
> >>>>> supporting additional frequencies, which will require DT to provide a
> >>>>> list of supported frequencies for the system, but that can be done on
> >>>>> top.
> >>>>
> >>>> I guess it would be possible to use different external clock frequencies on
> >>>> a sensor in a given system but that seems to be a bit far fetched, to the
> >>>> extent I've never seen anyone doing that in practice.
> >>>>
> >>>> Originally, the driver set the frequency based on the clock-frequency
> >>>> property. If we're removing that but use a fixed frequency instead, then
> >>>> how is that going to work going forward when someone adds support for other
> >>>> frequencies in the driver and has a system requiring that, while there are
> >>>> some other platforms relying on the driver setting a particular frequency?
> >>>
> >>> The standard property for this is link-frequencies, not clock-frequency.
> >>> Deprecating clock-frequency now paves the way to use the standard
> >>> property later when/if someone implements support for additional
> >>> frequencies.
> >>
> >> The external clock frequency and link frequency are different indeed, but
> >> they are related. The link frequency has been selected in a way that it is
> >> possible to generate that exact frequency using the chosen external clock
> >> frequency. If you change the external clock frequency, chances are good
> >> there is no PLL configuration to generate that link frequency.
> >
> > But aren't we supposed to pick the clock frequency based on the link
> > frequency specified in DT ?
>
> No. In a general case there is no reliable way to come up with an external
> clock frequency based on another, different if related, frequency.
>
> > In any case, this policy needs to be carefully documented.
>
> I thought after ten or so years this would be already an established
> practice. :-)
>
> I agree it should be documented. We don't seem to have specific
> documentation for camera sensor drivers at the moment. I can submit a
> patch...
>
> >>>> Although, if you're saying that this driver only needs to work with DT that
> >>>> comes with the kernel and you don't care about DT binary compatibility,
> >>>> this would be fine.
> >>>
> >>> I believe this series to not break backward compatibility, as the driver
> >>> only works with a 24MHz clock, so I expect all DTs to specify that.
> >>
> >> What you're still doing here is defining the DT bindings based on the
> >> current driver implementation, not the device properties.
> >
> > Quite the contrary, the device doesn't require any particular input
> > clock frequency, so we're removing that from DT :-) Specifying the clock
> > frequency in DT is in my opinion a manual workaround for not computing
> > it at runtime based on the desired link frequency, while the link
> > frequency is a property of the system as it specifies the range of link
> > frequencies that are safe to use from an EMC point of view.
>
> The external clock frequency is significantly lower than the link frequency
> (usually), but it still comes out of the SoC (or a PMIC chip). The clock
> signal track on PCB as well as wiring may also be rather long, depending on
> where the camera sensor is --- quite possibly tens of centimetres.
> Therefore I wouldn't categorically rule out possible EMC issues with that
> one either.

That's a valid point.

> The bottom line is: use a known-good, safe frequency.

What if different input clock frequencies are needed to achieve
different link frequencies ?

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-04-17 04:11    [W:0.282 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site