lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[Patch 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
    Date
    Currently we set the tx/rx buffer to 0xff when NULL. This causes
    problems with some spi slaves where 0xff is a valid command. Looking
    at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
    Following this convention solves the issue.

    Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
    Signed-off-by: Justin Chen <justinpopo6@gmail.com>
    Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
    ---
    drivers/spi/spi-bcm-qspi.c | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
    index c48c399dce53..e00208801c8b 100644
    --- a/drivers/spi/spi-bcm-qspi.c
    +++ b/drivers/spi/spi-bcm-qspi.c
    @@ -669,7 +669,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
    if (buf)
    buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
    dev_dbg(&qspi->pdev->dev, "RD %02x\n",
    - buf ? buf[tp.byte] : 0xff);
    + buf ? buf[tp.byte] : 0x0);
    } else {
    u16 *buf = tp.trans->rx_buf;

    @@ -677,7 +677,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
    buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
    slot);
    dev_dbg(&qspi->pdev->dev, "RD %04x\n",
    - buf ? buf[tp.byte] : 0xffff);
    + buf ? buf[tp.byte / 2] : 0x0);
    }

    update_qspi_trans_byte_count(qspi, &tp,
    @@ -732,13 +732,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
    while (!tstatus && slot < MSPI_NUM_CDRAM) {
    if (tp.trans->bits_per_word <= 8) {
    const u8 *buf = tp.trans->tx_buf;
    - u8 val = buf ? buf[tp.byte] : 0xff;
    + u8 val = buf ? buf[tp.byte] : 0x00;

    write_txram_slot_u8(qspi, slot, val);
    dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
    } else {
    const u16 *buf = tp.trans->tx_buf;
    - u16 val = buf ? buf[tp.byte / 2] : 0xffff;
    + u16 val = buf ? buf[tp.byte / 2] : 0x0000;

    write_txram_slot_u16(qspi, slot, val);
    dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
    --
    2.17.1
    \
     
     \ /
      Last update: 2020-04-16 19:44    [W:2.676 / U:0.752 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site